Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.
This is where all the old posts go so they can still be used for reference and searched.
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
I will do weather pack connectors where i can. And keep the terminal end to a minimum. I know I'll need the to connect to the starter solenoid and things like that where I'm connecting to a post.
Agreed. I have a set of the ratcheting style double crimp with various dies. It will let you make production electrical quality double crimps on weather pack terminals and reliable crimps on insulated or non-insulated terminals. The ratchet means the tools won't release until the crimp has been completed. When adjusted properly it means your crimps won't fail.
I personally buy from Waytek as posted above, the large quantities are easier in bags than packs of 24.
Grounds are just as important as powered connections.
It can but we are not driving space shuttles or taking cat shots, so shock & vibe is minimal in our case, a soldered joint will keep corrosion out of the connection.
Most wire jobs including ones using scotch locks work great at the time of assembly , it the 2-3 years down the road when wired shit starts happening due to corrosion in the connections or the crimp/connection start to loosen .