• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Ringing sound like a bell

Tulsa76bronco

Sr. Member
Joined
Apr 23, 2013
Messages
635
Has anyone heard a ringing sound when they turn there steering wheel? I used to here it then it went away and now back or at least I'm paying attention now.
 

Apogee

Contributor
Bronco Guru
Joined
Nov 26, 2005
Messages
6,348
Loc.
Tangent, OR
I had a ringing sound when my rear u-joint was going out once when I has a limited slip diff in it...my hypothesis being that turning would exert enough added load to the pinion, thus making the partially failed u-joint to ring the driveshaft like a bell. It was a very distinct sound.
 

thegreatjustino

Contributor
Red Head Grease Monkey
Joined
Jan 23, 2002
Messages
16,291
Loc.
Stockton, CA
I had a ringing sound when my rear u-joint was going out once when I has a limited slip diff in it...my hypothesis being that turning would exert enough added load to the pinion, thus making the partially failed u-joint to ring the driveshaft like a bell. It was a very distinct sound.

Had this same issue years ago. Way before I learned to work on my own Bronco, so I just took it to a mechanic. He subbed it out to a driveline shop and told me it had some driveshaft issues. Rang like a bell periodically - usually upon acceleration.
 

RT

Bronco Guru
Joined
Sep 29, 2003
Messages
1,037
I had the aftermarket cover behind the wheel hitting the column sounding like a bell one time.
made a gasket spacer, took care of that. My bearings are probably shot though.%)
 

hankjr

Contributor
Bronco Guru
Joined
May 11, 2013
Messages
1,761
i hear ringing sounds most of the time, but i think the root cause is too much heavy metal back in the day :-(

ok, i crawl back in my hole now :)

Hank
 

JB Fab

Sponsor/Vendor
Bronco Guru
Joined
Mar 21, 2004
Messages
1,518
I had the aftermarket cover behind the wheel hitting the column sounding like a bell one time.
made a gasket spacer, took care of that. My bearings are probably shot though.%)

Same thing here, spun it on a lathe to remove about 1/8"
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
Or one of your friends hid a bell up under the body where you can't see it. Not that I've ever done that.
 
OP
OP
Tulsa76bronco

Tulsa76bronco

Sr. Member
Joined
Apr 23, 2013
Messages
635
Ok I'll start to investigate the pinion and steering column, it was not doing it for a while but now it does it all the time when in turn the steering wheel.......one of many issues
 
Top