• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Ground wire attached to Carb

boss

Full Member
Joined
Jul 20, 2014
Messages
177
Loc.
Pittsburgh
I was wondering why my 75 motorcraft 2150 would have a ground wire attached. The ground is connected to the accelerator spring bracket bolted to the in take manifold and then connected to the carb attachment bolt on the intake manifold.
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
LOL...great question. Maybe a PO that wasn't terribly electrically inclined?
 

bax

Contributor
Old Member
Joined
Aug 22, 2005
Messages
14,552
Adds 20 more HP if the carb is grounded. Thats why they bolt them on. A ground wire is just someone wanting more HP. You can only get 20HP
 

bmc69

Contributor
Bronco Guru
Joined
Jun 11, 2004
Messages
12,015
I was thinking maybe it was needed for the electric choke, but not sure.

The carb is grounded to the engine block just fine through it's base mounting studs. ;)

Electric chokes have a dedicated ground wire. I usually attach those to one of the carb mounting studs.
 

half cab

Contributor
Guru Bronco
Joined
Dec 8, 2010
Messages
16,311
Someone probably told po that grounding the spring to the catb bolt would stop head light flickering :eek:
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
There is also the idle dashpot solenoid that needs a ground.
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
The carb WAS grounded to the block when it was new, but with 40 years of corrosion, it might need a dedicated ground wire. Grounding it certainly won't hurt anything. But follow the wire - it might not be grounding the carb; it might be grounding something ELSE through the carb (which would be dumb). If that's the case, either move that wire to the intake/block/battery, or add another GROUND wire from that one to one of those true grounding points.
 
OP
OP
B

boss

Full Member
Joined
Jul 20, 2014
Messages
177
Loc.
Pittsburgh
My dashpot is not electrical, and the ground wire is connected to a bracket on the rear of the intake manifold.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
The old Jacob's Ignition boxes had a dedicated ground wire that was recommended to attach to the carburetor or, if that was not convenient, a valve cover bolt.

Of course, this doesn't sound like one of those anyway, since it's short and has a known termination point. It was just something worth mentioning regarding older products.

Paul
 
Top