Hello All,
Finally getting around to putting engine and transmission in.
Here's what I have:
1) SBF 302 block
2) 4R70W
3) AA adapter kit - https://www.wildhorses4x4.com/produ...dapter-converter/Bronco_Transmission_Adapters
4) D20 T-shift
5) BC Broncos crossmember - https://bcbroncos.com/shop/engine/e...1-4-speed-cross-member-4r70w-using-d20-tcase/
I've installed the crossmember from BC Broncos and once the engine/tranny combo in, something seems not right... Attached are some photos.
Issues:
1) Engine/tranny seem tipped back - what I mean is it seems the engine not sitting in the chassis properly. Maybe that's how it's supposed to be, but just looks funny. Engine seems tilted and the mounting bracket for the AA kit is not parallel with the crossmember, if that makes any sense. Are there any measurements for any of this? Vague I know...
2) There is no clearance for the driveline from the tcase yoke to the d44 yoke. The crossmember interferes.
Let me know what other Information I can provide.
I've also reached out to BC Broncos and will let you know what I hear.
Maybe the best choice is to modify the original crossmember like the AA instructions say to. I just thought a turn key crossmember would be the answer, as I'm not a metal fabricator.
Thanks in advance,
Levi
Finally getting around to putting engine and transmission in.
Here's what I have:
1) SBF 302 block
2) 4R70W
3) AA adapter kit - https://www.wildhorses4x4.com/produ...dapter-converter/Bronco_Transmission_Adapters
4) D20 T-shift
5) BC Broncos crossmember - https://bcbroncos.com/shop/engine/e...1-4-speed-cross-member-4r70w-using-d20-tcase/
I've installed the crossmember from BC Broncos and once the engine/tranny combo in, something seems not right... Attached are some photos.
Issues:
1) Engine/tranny seem tipped back - what I mean is it seems the engine not sitting in the chassis properly. Maybe that's how it's supposed to be, but just looks funny. Engine seems tilted and the mounting bracket for the AA kit is not parallel with the crossmember, if that makes any sense. Are there any measurements for any of this? Vague I know...
2) There is no clearance for the driveline from the tcase yoke to the d44 yoke. The crossmember interferes.
Let me know what other Information I can provide.
I've also reached out to BC Broncos and will let you know what I hear.
Maybe the best choice is to modify the original crossmember like the AA instructions say to. I just thought a turn key crossmember would be the answer, as I'm not a metal fabricator.
Thanks in advance,
Levi











