1969’s build thread

[1969]

Took a couple measurements
82” wide to the outside of the tires
27 3/16” to the bottom of frame below the body mount under the front floor boards.

 

[Yeller]

That’s narrower than I expected by a couple of inches. Mine is 81-1/2 with 17x8 wheels with 4-1/4” of back spacing.

 

[SavageBurro]

That’s narrower than I expected by a couple of inches. Mine is 81-1/2 with 17x8 wheels with 4-1/4” of back spacing.

Narrower than I would expect as well. I have 05+ super duty front narrowed to 67 wms. With 39x13.5x17 tires on 17x9 wheels w 4.25 backspace I'm 83.5 outside of tire width.

I have to say, your build is super clean. Well done!

 

[kman67]

Your build is looking great!
So what WMS did you end up with? I’m assuming you only shortened the passenger side? Did you need to turn your C’s to adust castor?
Thanks,
Kyle


Sent from my iPhone using Tapatalk

 

[1969]

Your build is looking great!
So what WMS did you end up with? I’m assuming you only shortened the passenger side? Did you need to turn your C’s to adust castor?
Thanks,
Kyle


Sent from my iPhone using Tapatalk

It’s a full width 08 super duty axle at 72”, nothing has been shortened.
No I adjusted the caster using the upper radius arm to get 7*.

 

[1969]

Swapped in a 1” Wild Horses body lift and got rid of the 2”

 

[1969]

Toms EFI tank is in. Welded their optional skid plate to the tank and did a custom tank strap mount. Plenty of room for the Sterling 10.5 too.

 

[1969]

Filmed a little walk around video of the Bronco in its current state for those interested

 

[Speedrdr]

How did you get your frame that slick/smooth? Looks good.

Randy

 

[1969]

How did you get your frame that slick/smooth? Looks good.

Randy

The entire outside of the frame is plated in 3/16th steel.

 

[904Bronco]

Just read through your build... Nice work, I appreciate those who have skills well beyond mine.

 

[Speedrdr]

The entire outside of the frame is plated in 3/16th steel.

Yep, that’ll do it, all right! How much weight did that add to the frame??? I’m curious, but too lazy to do the math.

Randy

 

[1969]

The NP205 is ready to go in the Bronco. Off-road designs rebuild kit, 1350 yokes, JB fab twin stick, and some steel-it paint.

 

[Bitch'nBronco]

Looks nice! If you've got time I recommend JBFab's adjustable shift detents for the NP205. Makes shifting it a lot easier

 

[1969]

Notched the ZF5 and mounted the NP205. Next up is to modify the BC Broncos ZF5 crossmember as it doesn’t fit mine for some reason? BC did say that’s why they don’t list them for sale anymore when I bought it. Then also build a crossmember to hold up the back end of the NP205. No one on here was lying when they said it was a tight fit!

 

[surfer-b]

just read through your build, nice work, clean job, keep the post coming

 

[papy]

stunning work bud! looking forward to seeing the end result

 

[Bitch'nBronco]

My BC crossmember didn't fit all that great either. I didn't have to do much to make it fit, but that was years ago and probably a different batch of crossmembers.

 

[1969]

I had originally installed a U-bolt eliminator kit but decided I wasn’t a big fan of it, so swapped back to a traditional U-bolt kit from ruff stuff. Much better!

 

[gnpenning]

I had originally installed a U-bolt eliminator kit but decided I wasn’t a big fan of it, so swapped back to a traditional U-bolt kit from ruff stuff. Much better!
View attachment 915559

What didn't you like about the eliminator kit?