• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Windshield and Window frame gap(s) - See pics

OP
OP
trailerjack

trailerjack

Bronco Guru
Joined
Sep 5, 2013
Messages
1,591
Loc.
Central Texas
Really happy with the gaps now after adding one more shim.
 

Attachments

  • IMG_3487.jpeg
    IMG_3487.jpeg
    99.6 KB · Views: 120
  • IMG_3488.jpeg
    IMG_3488.jpeg
    126.9 KB · Views: 121

Meddle

Contributor
Jr. Member
Joined
Dec 22, 2023
Messages
129
Loc.
Upstate NY
Really happy with the gaps now after adding one more shim.
I am fighting this battle right now after removing my hard top and replacing the w/s hinge seal. The windshield is maybe only an 1/8 too far from the top of the door frame. I can see just a sliver of daylight toward the middle-top. The bottom of the door frame appears to be about perfect.

If I press firmly on the top-front of the w/s, the gap closes 1/8” and is perfect. Without the hinge seal installed, alignment is also good, so the seal is affecting the angle of the w/s ever so slightly. My door and quarter panel alignment/gaps are about as good can be so I don’t want to mess with that variable if I don’t have to.

Where did you end up shimming? At the body mounts or between the w/s hinge and cowl?

IMG_0940.jpeg
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
The body mounts are for setting the door gaps. The windshield to door gap, the way you have it now, it is going to be re-settable by reinstalling your hardtop.
I wouldn’t worry too much about a topless windshield gap, unless you plan to drive it that way all the time. Since it bounces around and changes as you drive and things flex, there’s not a lot to do with it.
If you want perfect door to windshield gaps, put the hardtop back on.
 

RV BRONCO

Contributor
New Member
Joined
Jan 9, 2022
Messages
14
No welds, this is a 66-68 windshield frame and is bolted in, reinforced with backing plates inside of the body.
A few pictures if needed for reference. Put Hard top on last week.1968 with orginal sheet metal
 

Attachments

  • 20250123_064647.jpg
    20250123_064647.jpg
    146.8 KB · Views: 100
  • 20250123_064659.jpg
    20250123_064659.jpg
    150.6 KB · Views: 108
  • 20250123_064714.jpg
    20250123_064714.jpg
    159.9 KB · Views: 95
  • 20250123_064638.jpg
    20250123_064638.jpg
    152.8 KB · Views: 102

Meddle

Contributor
Jr. Member
Joined
Dec 22, 2023
Messages
129
Loc.
Upstate NY
How is the hinge seal seated? Bulb at hinge side, or dash side?
I’ve got it mounted with bulb on dash side. After fiddling with it, I noticed the bulb protrudes more on one side of the seal. I flipped it so the higher side is facing down and riding into the tiny channel at the bottom of the cowl. That in turn made the windshield sit back further, ever so slightly, which tightened up my door gap at the top. It’s amazing such a small adjustment at the bottom affects the door gap at the top. I am pleased with it now! But you are right, DirtDonk, I am probably fusing over nothing since the w/s is going to be bouncing around barreling down the road anyway.

IMG_0942.jpeg
 
Top