Hi All, I have a 72 Bronco and whenever I begin to drive the voltmeter bounces all over the place, but it goes back to zero (middle) when I’m idling. But whenever driving it bounces all around.
As already mentioned, that is an ammeter (measures amps), not a voltmeter (measuring volts).
Be that as it may, though, as you guessed, it’s not supposed to bounce around. They do, but they’re not supposed to.
You say it bounces when driving but not idling. What about when just sitting there and revving the engine up to higher RPM’s?
Reason I ask about that, is to separate the possibility of simply having a weak, worn out gauge mechanism vs an electrical problem.
It’s possible for them to bounce around as you’re driving with the stiff suspension, causing the needle to bounce. But if it does it while you’re sitting there revving the engine, then it’s definitely an electrical issue.
In addition, if I let the bronco sit more than a couple days without driving, the battery goes dead.
What the others said.
If you disconnect it completely, and it still goes dead, then the battery itself is the problem.
Has anyone had this issue or can share advice?
Lots of us!



Haven’t had any discussions about it recently I don’t think, but over the years literally dozens of members have reported the issue. With various fixes, including just ignoring it.
Some were probably never resolved!
My friend thinks I need a new alternator but it has never stalled out while driving which leads me to believe it’s something else?
Your friends idea is not completely out of line, but at this point, it’s just a guess.
The fact that it tested good, however, does at least give the alternator a fighting chance.
Doesn’t feel like an alternator issue to me yet, because when an alternator goes bad and drains the battery, it usually kills the battery in one day. Not multiple days.
Not a universal truth, or any kind of a guarantee that this is always the result. But it’s more common than not.
If you come out in the morning and your alternator is warm (battery still connected of course) then the alternator and/or regulator is most likely the issue.
An alternator can still produce charging voltage about 14 1/2 or so, and still be bad. So verifying Output isn’t necessarily a definitive test.
Thinking about it more, a slow drain like that can be the result of a bad voltage regulator. You can disconnect the flat plug from the regulator and see if the drain goes away.
If there is any aftermarket wiring mischief, all bets are off!
Good luck. Luckily most of the tests are fairly simple. Just a matter of taking a little time and tracking things down. The Bronco wiring is pretty simple on a 72.