• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Voltmeter bouncing and battery drain

JMer811

New Member
Joined
Aug 13, 2025
Messages
15
Hi All, I have a 72 Bronco and whenever I begin to drive the voltmeter bounces all over the place, but it goes back to zero (middle) when I’m idling. But whenever driving it bounces all around.

In addition, if I let the bronco sit more than a couple days without driving, the battery goes dead. I jump it and it starts up immediately.

Has anyone had this issue or can share advice? My friend thinks I need a new alternator but it has never stalled out while driving which leads me to believe it’s something else?

Thanks for any tips on what it could be
 

1969

Contributor
Bronco Guru
Joined
Feb 28, 2022
Messages
1,090
Loc.
Reno, NV
Have you tested your alternator to see if it’s working properly?

 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
That's not a voltmeter - it's an ammeter, and it's supposed to stay near the middle. If it's bouncing, that suggests a poor connection somewhere - usually at the battery. Post pics of the terminals.

Jump-starting a dead battery is bad for the battery and for the alternator. It should only be done in emergency, and the battery should be trickle-charged ASAP, and then constantly when the Bronco isn't being used. I recommend Battery Tender brand because it's a true float charger. For simple storage maintenance, the smallest (Jr. ~0.75A = 750mA) is enough. But if there's a drain, either the battery has to be disconnected (don't use a disconnect that's installed between the terminals - simply loosen & remove a terminal) during charging, or the charger has to put out more current than the draw. Trickle-charge the battery until it's full (don't over-charge), and then measure the current draw with a digital multimeter set to DC Amps with the battery installed but disconnected, and the meter probes on the disconnected terminals.


Any decent meter will do, but this one has a lot of useful features that you can learn to use, and it's not overpriced.

 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
Disconnect the battery when parked. Does the battery still go dead? If so it is a bad battery. If it has been run down (especially multiple times) it is likely bad.

Amp meter bouncing, yea a lot of them do that. Pretty normal. Guessing you are still running the original mechanical voltage regulator and not the newer electronic regulator.
 
OP
OP
J

JMer811

New Member
Joined
Aug 13, 2025
Messages
15
Tested the battery / alternator and both are working well.

Any other ideas why it would be draining every 4-5 days after not using? Should I just get the trickle charger and that will solve my issue or is there a bigger issuer I am just hiding by using that?
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
Get a test light with a small incandescent bulb. No substitutions, no digital whatever, no LED lights. Just a small light bulb. You could use an instrument cluster light bulb or something along those lines.

Remove the ground cable from the battery and put the test light in series. If it glows, there is a drain on the battery and start disconnecting things. Most people start with pulling fuses to narrow the circuit. When that doesn't work you start disconnecting components..

Common items are aftermarket radio, voltage regulator, alternator (I know it tested good, but could still be it),

The incandscent lightbulb works better than the digital stuff for this. A digital volt meter is so sensitive that it will give false readings. The resistance of your skin can trip it out. The light bulb lights up when there is enough current passing through to actually be an issue, but ignores small currents that are not an issue. Clock memory, working correctly in aftermarket radios, draws power like a watch battery. Nearly nothing, the battery will self discharge faster than the keep alive memory. So that tiny current can be ignored. The light bulb test does that while a digital meter will have you chasing it down.

I know you said the battery tested good. So leave the battery cable off for a week. If it is dead after sitting with nothing attached to it, it really is a bad battery regardless of what the tester says.
 
OP
OP
J

JMer811

New Member
Joined
Aug 13, 2025
Messages
15
Tested the battery / alternator and both are working well.

Any other ideas why it would be draining every 4-5 days after not using? Should I just get the trickle charger and that will solve my issue or is there a bigger issuer I am just hiding by using that?

Get a test light with a small incandescent bulb. No substitutions, no digital whatever, no LED lights. Just a small light bulb. You could use an instrument cluster light bulb or something along those lines.

Remove the ground cable from the battery and put the test light in series. If it glows, there is a drain on the battery and start disconnecting things. Most people start with pulling fuses to narrow the circuit. When that doesn't work you start disconnecting components..

Common items are aftermarket radio, voltage regulator, alternator (I know it tested good, but could still be it),

The incandscent lightbulb works better than the digital stuff for this. A digital volt meter is so sensitive that it will give false readings. The resistance of your skin can trip it out. The light bulb lights up when there is enough current passing through to actually be an issue, but ignores small currents that are not an issue. Clock memory, working correctly in aftermarket radios, draws power like a watch battery. Nearly nothing, the battery will self discharge faster than the keep alive memory. So that tiny current can be ignored. The light bulb test does that while a digital meter will have you chasing it down.

I know you said the battery tested good. So leave the battery cable off for a week. If it is dead after sitting with nothing attached to it, it really is a bad battery regardless of what the tester says.
Appreciate the reply, I will
Try this
 

Bruners4

Full Member
Joined
Jul 22, 2019
Messages
286
Loc.
1/2 way to everywhere
Test Light method to check for a battery drain is the best. Setting it up so that the light is visible while you are pulling fuses one at a time is a real time saver.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Hi All, I have a 72 Bronco and whenever I begin to drive the voltmeter bounces all over the place, but it goes back to zero (middle) when I’m idling. But whenever driving it bounces all around.
As already mentioned, that is an ammeter (measures amps), not a voltmeter (measuring volts).
Be that as it may, though, as you guessed, it’s not supposed to bounce around. They do, but they’re not supposed to.

You say it bounces when driving but not idling. What about when just sitting there and revving the engine up to higher RPM’s?
Reason I ask about that, is to separate the possibility of simply having a weak, worn out gauge mechanism vs an electrical problem.
It’s possible for them to bounce around as you’re driving with the stiff suspension, causing the needle to bounce. But if it does it while you’re sitting there revving the engine, then it’s definitely an electrical issue.
In addition, if I let the bronco sit more than a couple days without driving, the battery goes dead.
What the others said.
If you disconnect it completely, and it still goes dead, then the battery itself is the problem.
Has anyone had this issue or can share advice?
Lots of us! 🙄😩😉
Haven’t had any discussions about it recently I don’t think, but over the years literally dozens of members have reported the issue. With various fixes, including just ignoring it.
Some were probably never resolved!
My friend thinks I need a new alternator but it has never stalled out while driving which leads me to believe it’s something else?
Your friends idea is not completely out of line, but at this point, it’s just a guess.
The fact that it tested good, however, does at least give the alternator a fighting chance.
Doesn’t feel like an alternator issue to me yet, because when an alternator goes bad and drains the battery, it usually kills the battery in one day. Not multiple days.
Not a universal truth, or any kind of a guarantee that this is always the result. But it’s more common than not.
If you come out in the morning and your alternator is warm (battery still connected of course) then the alternator and/or regulator is most likely the issue.
An alternator can still produce charging voltage about 14 1/2 or so, and still be bad. So verifying Output isn’t necessarily a definitive test.
Thinking about it more, a slow drain like that can be the result of a bad voltage regulator. You can disconnect the flat plug from the regulator and see if the drain goes away.

If there is any aftermarket wiring mischief, all bets are off!

Good luck. Luckily most of the tests are fairly simple. Just a matter of taking a little time and tracking things down. The Bronco wiring is pretty simple on a 72.
 
Top