• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. eds66bronco

    EGR bypass plate for EFI conversions

    I do know for a fact that the egr diaphram pooped out on my valve and my engine began to knock due to the higher combustion temps. plus the vacuum leak isn't helping engine performance. I never could understand when i was doing all the research to do my conversion why people would want to...
  2. eds66bronco

    Recommendations

    we used to have really bad mouse problems with our camper until we started covering everything with dryer sheets and have had no mice after that. Make sure to put a couple in the glove box and i usually will cover the air box, vent box and plug the tailpipe (just remember to unplug it before you...
  3. eds66bronco

    Fuel Injectors?

    I used this guy... http://www.witchhunter.com/ way cheaper than buying new. He got all mine to flow better than factory spec., had quick turnaround too. I'd just grab a replacement at the junk yard and send them off to be cleaned. you may find the e-bay set has a stuck injector and then you'd...
  4. eds66bronco

    airsoft pellet tire balancing.

    So looks like i need about 10oz for mine. Wally world trip this weekend!
  5. eds66bronco

    airsoft pellet tire balancing.

    how much did you use? I've got clumped up equal in my 36 12.5 15's to get rid of first but want to give the airsoft pellets a try. anyone got a measurement in dry measure (like 1 cup of flour) for the proper amount? Guess i need to get a scale.
  6. eds66bronco

    Comment by 'eds66bronco' in article 'How to build a Fuel Accumulator for EFI'

    I actually double checked and the p4105 is in fact a fuel rated filter.
  7. eds66bronco

    My truck is hard to start?????

    Have someone crank it while you wiggle the battery cables. Shine up all connections with sand paper/wire brush and use a dielectric grease when you reassemble. I've had several cables go bad where the cable joins the clamp and cause resistance when it warmed up. No problem with cold starts.
  8. eds66bronco

    Money Pit - Phase III

    Nice progress. I love the look of the bogger and uncut rear... too bad it probably can't stay that way. Is the slider welded to the frame or just bolted. I noticed the door post is now welded to the slider. how would you remove the body now?
  9. eds66bronco

    Comment by 'eds66bronco' in article 'How to build a Fuel Accumulator for EFI'

    I don't know much about the Marine style filters. If they are large enough, I'm sure they would work fine. I was looking for the largest capacity filter I could find and the P4105 transmission filter fit the bill. If it is better filtration you are looking to accomplish then you could always...
  10. eds66bronco

    Project..(hottamalee!)

    thanks. this is on my honey-do list for this spring... my wife also wants an uncut. gotta keep the ladies happy 8-)
  11. eds66bronco

    Project..(hottamalee!)

    what brand quarters did you use? looks like they fit pretty well
  12. eds66bronco

    Starting problems when hot.

    i know you probably tried this already but clean the terminal and cable clamps and connectors on battery cables/starter solinoid. I just went through this last fall. Started up great cold but once i shut it down, it would crank but not fire. wire brushed the terminals with one of those wire...
  13. eds66bronco

    Donor seats from?

    older saab 900 seats, (Mid 80's to mid 90's.) they have adjustable height/tilt, full tilt forward for rear access, full recline, flat mounting feet (a couple actually line up with the factory holes) and built in sliders. Grab the shoulder/lap belts as well.
  14. eds66bronco

    Custom radius arm pics please!

    nice set-up but holy $$$$ :o :o :o guess i'd need to plant one of those money trees first!
  15. eds66bronco

    rear disc

    OK, we'll just go with bearing failure then:-* that looks like a not so fun trail fix
  16. eds66bronco

    rear disc

    Forgot to mention the other reason for doing rear disc is after seeing a couple shots of the mess that happens if the rear wheel bearings let go or the shaft saps near the outer housing and the axle shaft comes out while traveling at speed :o the caliper keeps things together
  17. eds66bronco

    to cut or not to cut?

    bolt up your adapter and measure the length of the shaft. Put a straight edge across the end of the housing and measure the depth to the bottom of the hole. I ended up needing to remove about 3/4" of the threaded part. I used the 6 cyl intermediate housing and the adapter plate from BCB. Not...
  18. eds66bronco

    Finally saw some of my work on here

    Nice stuff! Love the clean look of those rocker too! how'd you tie those in? or ae they just welded to the body? p.s. salute to you for your service to our country:)
  19. eds66bronco

    rear disc

    the only place i have seen my rear disc setup really shine is after mud/water crossings and then easing over a drop where the rear end is the only thing holding. I did the hydroboost and rear disk at the same time. I wish i had just done the hydro so i had something to compare to. My worthless...
  20. eds66bronco

    Water pump bolt broke

    If it turned a couple times, soak it with pb and turn it back in if you can. this will get the pb into the first few threads so when you back it out, there is some lube there. Heat it up real good first with the torch. Good luck.
Top