Search results

?? I Belive I Put The Right One In The Right Sides Short In Driver Side Long In Pass,the Only Thing Im Thinking Is That There Was To Much Paint In Axel Tube And The Little Bit I Had To Pound In Is Causing The Wheel Bearing To Bind. What Do Ya Think Any More Input,will Help.

Bumper Front W/ Winch Bar And Rear With Swing Out Tire.i'm In For Sure If Good Deal..

Alright,the Question Is I Had The Rearend Rebuilt, New Gears, Trutrack,i Put The Thrid Member In The Housing Bolted Up,put My Drum Back Plates On And Slid The Axels In The Housing The Axel Went In Pretty Easy Got About Half The Bearing In The Housing,due To Me Painting The Housing And Paint...

backspacing I'm Running 4.5 Backspacing And I'm Running 17 Inch Wheels And It Clears Everything. And The 17" Wheels Look Sweet With My 36"

First,i'm Doing My 5.0efi Swap Will Be Using My C4 Tranny,what Size And Weight Flex Plate Do I Use. My C4 Is Rebuilt, Can I Use My Stock Tourqe Converter Or Do I Need To Change,or Is There An Upgrade To My Tourqe Converter To Make The C4 Better With Minimal $$$ Involved.i Will Be Running 5.0 Efi...

Bolt Size The Bolts Thru The Spring Eyes Are 5/8 X 4 1/2 Long And The Shackel To Frame Mount Is 9/16 X 4 1/2 Long I Just Did Mine Yesterday,these Lenthes Will Leave You Enough Room For Flat Washers On Both Ends And A Lock Washer On The Nut Side, I Also Used All Zinc Plated Grade 8 Bolts And...

Is There Anybody Out There That Makes A Small Block Or Spacer For The Front To Lift Up To Make Even With The Rear.i Have A New 3.5 Lift And The Back Sits Higher Than Front.about 1 Inch.

Box!!!! Just Cot My Box Back From West Texas Offroad,ship To Them Was 25.00,total Rebuild 115.00,ship Back To Me 20.00 For A Total Of 160.00 And They Did An Exellant Job And Where Very Helpful,great Service.

Went To The Car Show Tonight,to See The Concept Bronco Pretty Cool I Took Alot Of Pics I Did Not Get To See Motor Compartment,it Did Not Have A Transfer Case Or Transmission Under It, They Had It Ropped Off But I New A Guy Working The Ford Part And Got To Look Everywhere Pretty Close. I Like The...

Went To The Car Show Tonight,to See The Concept Bronco Pretty Cool I Took Alot Of Pics I Did Not Get To See Motor Compartment,it Did Not Have A Transfer Case Or Transmission Under It, They Had It Ropped Off But I New A Guy Working The Ford Part And Got To Look Everywhere Pretty Close. I Like The...

who has the best deals on new motors.want to get a new 5.0 wheres the best place to buy a long block.

Anybody Have Pics Of There Locar Auto Shifter,i Need Pics Of Where Its Mounted In Cab,pic Under Bronc Where Its Mounted To Tranny,also Any Input On Install For A Heads Up,and What Size And Model.

Is Anybody Running The Procomp Mx-6 Shocks That Are 6 Way Ajustable. Any Feed Back!

How Tight Do You Tighten The Nuts Behind Hubs That Hold The Drum On. As Thight As I Can Get? Or Is There A Toruqe Spec.

rims the rims are 17x9 extreme alloys with 5 inch back spacing,they also sell spacers for the rims if you want to push rim out more.im very happy with the 17" rim it looks alot better on the 35 insted of the small 15, and it will make your bronco handle a little better,you will not have all the...

rims I Just Got My 35 12.50 Traxxus Tires 17x9 Rims Today,and Installed And They Rub A Little At Full Turn With Stock Radius Arms.i Have 3.5 Suspension And 2 Inch Body. These 17" Rims W/ 35 Look Sweet. SO THEY WILL FIT/WORK, MAYBE A LITTLE RUB.

You Will Need A New Carrier For A 30.

Gears Front Rear I Just Completed My 44 And 9" Rebuild. Parts To Completly Go Thru 44 Was 375.00 Thats For 4.30 Gears,new Trac Lok Ls Carrier,complete Rebuild Kit.axel Seals,all Wheel Bearings. 9" Was 475.00 Thats For Everthing Above, But I Went A Detroit Tru Trac In Rear.thats 850.00 For...

Lower Front Coil Cups Have A Opening On One Side.does This Opening Go Towords,the Hub Or The Bump Stop, Please If Somebody Could Look At Theres And Let Me Know. Thanks

I Finishing My 75 Dana44 Front Rebuild,in Process Of Putting On Backing Plates *** Question, The Adjuster Slots Are Off Set On Plates,are The Slots More Towords The Front Or More Towords The Rear Of The Axel,are They The Same On Both Sides.**question Two,the Steel Line That Comes Out Of The...