Search results

Does it hurt to run it out to the corner of the truck, just like a breather cap?

Actually I was thinking full of gas with a welding torch would be a good combination for a Darwin Award.

Thanks for the reply

Ok, so like I had it before, to the large port on the front of the carb?

Thanks. I have Edelbrock valve covers, they have the baffles in them. It seems like almost water like, mixed with oil. I ran straight 30 in it to break it in and changed to 10w30 now. <br><br>wildbill, you recommend running the pcv valve back to the carb? I originally did this and the...

I have always used 10w30, what do you recommend 20w50? <br><br>As far as the PCV valve, I don't want to run that to the carb... I run a breather straight out to the front of the truck. What about replacing the breather with the pcv valve and still letting it out to the corner? I am smog...

I have an MSD ready to run, works great. If you need some spare parts off my old distributor email me, I can send it to you.<br><br>

I belive you do. You will also need an adapter plate to go from square bore to spread bore....

Is there any "gotchas" I need to know about when I drop the aux tank? I am going to put on extended radius arms and I belive in order to weld them on I need to take out the tank. Or, I may become a Darwin Award winner. Thanks

That's right, put one of those super u joints in and watch what that tweaks...

I have what seems like a lot of oil vapor coming out of my breather hose on my driver side. Is this normal? It is a newly rebuilt engine from the block up. I had it before in my old engine also but I figured I would ask. Any ideas would be much appreciated.<br><br>I am running 302, 289...

I have got a 140 amp Powermaster, works good. Also have a red top optima.<br><br>

Yeah but you can't everything. You lower the radius arms to keep them off the frame, you lose ground clearance. I think anything is better than the stock I have.

Yeah I have seen a lot of the homemade ones. I have also seen some people lose control when they brake really hard with those things. Not sure, I think the Duff ones are sweet but a lot of $. Then again I am not married, no kids... :P

Just wondering if anyone could offer some input on extended radius arms. I am looking at getting some to help correct my steering and of course for some more articulation. I think I like the James Duff ones the best but I thought I would run it by everyone. Thanks

Thanks. Yeah it sure is nice to hear those Flowmasters again.

After three months of pain, I drove it home from the shop tonight. I just had to vent a little so here I am. A simple new engine turned into a nightmare. Vacuum leaks, the builder put the wrong cam in, balancers not lining up, etc. Well I guess it is nice to drive it again and I hope I don't...

Great, I just had mine rebuilt and it is leaking now. I am glad it is under warranty but wow, that is a big repair for a small leak. They messed up my valve body and had to replace the entire thing the last time I went in with the warranty.

I've got a ready to run billet MSD, HEI, with a Blaster 3 coil. Works great.

Yeah me too