Search results

Have ball valves not pull cables on hoses. They are open. When you said core did you mean radiator core or heater core? It blows SOME warm air, but mainly seems that cold air is in cab and not being warmed. Truck has no insulation like a ranger pkg with carpet etc.

Currently have stock heater core. Am running 190*F Thermostat, but still just aint warm enough in the cab driving home from hunting. My main question is has anyone ever out one of those Electric DC heaters (saw some on Ebay before and in a truck stop) in their cab. Was thinking I could mount it...

I am unsure if my 20 is working right or not, or if the problem I think I have is actually a problem. It is a J shift. Can you go from 4 high to 4 low or vice versa, 4L to 4H without backing up? I know I have to put it in neutral to shift. But when I am on left side I have to back up (like i was...

I am in the middle of my install. Kind of looks like they may not stretch far enough to cover holes where PO had mounted old ones. Also he had left LOTS of metal. I was just hoping to see some pics of profile view for the UFO's. Mike

That sounds right as far as 1/2" retaining bolts (3/4" socket) is there a benefit of this config over the others? Also does bearing retaining color come with bearings at parts store? Of course I cut mine off since bearing was trash and could not get off any other way.

Have what appears to be big bearing axle (over 3 1/4"). Drums are 11" inside diameter. &4 bronco. So is this a large bearing medium duty or what type rear end? Also when I put a new bearing on it HAS to be pressed on right? Thanks for your help. Mike

Ok...a few other questions...what exactly is a "lunchbox" locker....Also what is a lock-right locker? Is it a spool, a true lock-up locker or a limited slip? Are they a cheaper version of what type?

looking for a truetrac for 9" 28 spline...Thanks, Mike G

Okay have done all sorts of searching and have a question or two. I have already decided that trutac is gonna be best way for me to go in the rear. My first question is IF my ring gear is okay and not worn, is it a direct bolt on to the trutrac carrier? Also am running 31's now and for a while...

Ok...may have to change screen name...Henrietta is the BRONCO's name i.e. Henry Ford (Henrietta). Definitely not a woman here.... Even thogh female EB owners are bad a$$. If Ray sees this give me a hand here. Main reason I ask is if you Ebay for EB alternators you come up with a few different...

Was wondering what the difference is. I am looking to change alternator to higher amp (than stock), with internal regulator. Also looking for the easiest install with minimal mods and decent price.I know about the wiring and the amp gauge removal. Also is there a CT that is measuring amperage or...

The one I saw at wal-mart was like the one 2badrotties had but not R/C. Daughter loves it. I just don't like the friggin' music it plays!

Found a much smaller one, like the size of a small tonka. $14.

My '74 already has the ignition box, affectionately known as the brain! It should be a direct swap ignition wise. What about p/s pump? Use the old one?

Just bought a wrecked '85 F150, with a 302. I am going to swap engines from this one to Bronco. I have already thought of using my pan and pickup tube, also changing flywheel since C6 behind '85, and C4 in Bronc. Also the water pump and new engine mounts. The engine is carbuerated with Edelbrock...

Lately I have been getting alot of bad gas, i.e. water. I was doing somelight crawling the other day and she sputtered on me alot. I changed the filter and and a lot of water came out of it. Currently I only have filter in carb in fuel system. Has anyone used a diesel water separator on Bronco...

Sachem, gotta quit trying to put the big gulp in there! ;D Or the quarts of beer!

Mass buy? Is there a new one...time to check that thread!

Grizzly...thanks, that may be the reason they say that the 8" is ideal...maybe I should measure again with my butt in the seat and see if I lose any of the 10 inches.

About to order my Tuffy box and had a question. The catalogs say that "most will use the 8" box" Well I did some measuring and am wondering how far back they mount. I have 10.5" between the seats, but if it goes all the way back to the seatbelt mounts I only have 8" of clearance. I changed seats...