I'm trying to put my 72 Explorer Sport back on the road. It sat for 5+ years before I bought it in 2016 and another 9 years since. It's going to be a *mostly* original patina build. I'm replacing the fuel system (tanks, pumps, lines, carb rebuild) and brake system in their entirety before starting it.
I don't know a lot about carbs and need basic education and some pointers. I'd feel more confident in doing an Explorer EFI swap than this. LOL
It is running 46P jets. I now live at 4700', but the truck lived at 7700'+ most it's life. Is the 46P jet close to what I need? I haven't messed with any of the settings, except for the idle screws. They were set about 4.5 turns out from stop, most the videos I watched said 2 turns out +/-, so that is where I set them. Compared to what I'm seeing on the rebuild videos, mine is super clean, and may have been recently rebuilt.
I put in a carb rebuild kit yesterday. I think I found it has 2 dash pots/vacuum breaks, one electric and one mechanical. Again, this is new to me and I don't really know what the heck I'm looking at. Is this correct? Why are there 2? Should I replace both? I'm assuming the mechanical one should be replaced, it looks like a diaphragm and I don't trust it to work.
It also has a choke vacuum break.
And it was changed to a manual cable choke. I want to remove the manual choke and return to stock heat activated choke or an electric choke kit. I lean towards the stock choke because "stock" is my general goal with the build. It won't be a daily driver and won't get driven much in the winter.
All advice, insights, web links are all appreciated. I'd like to shoot for as reliable as possible, so please let me know what parts are possibly still useable or should be replaced.
I don't know a lot about carbs and need basic education and some pointers. I'd feel more confident in doing an Explorer EFI swap than this. LOL
It is running 46P jets. I now live at 4700', but the truck lived at 7700'+ most it's life. Is the 46P jet close to what I need? I haven't messed with any of the settings, except for the idle screws. They were set about 4.5 turns out from stop, most the videos I watched said 2 turns out +/-, so that is where I set them. Compared to what I'm seeing on the rebuild videos, mine is super clean, and may have been recently rebuilt.
I put in a carb rebuild kit yesterday. I think I found it has 2 dash pots/vacuum breaks, one electric and one mechanical. Again, this is new to me and I don't really know what the heck I'm looking at. Is this correct? Why are there 2? Should I replace both? I'm assuming the mechanical one should be replaced, it looks like a diaphragm and I don't trust it to work.
It also has a choke vacuum break.
And it was changed to a manual cable choke. I want to remove the manual choke and return to stock heat activated choke or an electric choke kit. I lean towards the stock choke because "stock" is my general goal with the build. It won't be a daily driver and won't get driven much in the winter.
All advice, insights, web links are all appreciated. I'd like to shoot for as reliable as possible, so please let me know what parts are possibly still useable or should be replaced.











