omureebe
Full Member
- Joined
- Jun 18, 2013
- Messages
- 403
So I can see that many, if not most, people that run a throttle body EFI are running the 3/8" lines (supply and return) on the inside (or top) of the driver's side frame rail. Is there a reason why it's this way versus outer driver's side rail, or inner passenger side?
As I'm in putting in my new tank with FiTech retrofit pump and running lines, my dual exhaust on the driver side is really close to the inner driver side rail. And the floor supports are a lil crunchy, and trying to make hard line fit on top doesn't look right. So I'm thinking why not run on either the outside of the driver rail or inner passenger side. Looking for input with folks that have done this.
Thanks
Omar
As I'm in putting in my new tank with FiTech retrofit pump and running lines, my dual exhaust on the driver side is really close to the inner driver side rail. And the floor supports are a lil crunchy, and trying to make hard line fit on top doesn't look right. So I'm thinking why not run on either the outside of the driver rail or inner passenger side. Looking for input with folks that have done this.
Thanks
Omar