Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
That was worth watching!
I found it interesting that they use new castings for the small block Chevrolet motors.
Also the ring installer portion is is pretty cool.
Mine arrives next week!;D
That was worth watching!
I found it interesting that they use new castings for the small block Chevrolet motors.
Also the ring installer portion is is pretty cool.
Mine arrives next week!;D
That was worth watching!
I found it interesting that they use new castings for the small block Chevrolet motors.
Also the ring installer portion is is pretty cool.
Mine arrives next week!;D
Yes.
I ordered a 347 long block. I have a ProFlo 4 to go on it.
It turns out the Blueprint 302, 306, 331, and 347 get pedestal rockers as standard. I wanted a full roller motor, so I paid the difference.
This should be fun in a light car like the Ranchero. It's only about 2300 pounds.
Vast majority of machining is done with water-based coolants (including automotive, transportation and aerospace). Typically oil-based coolant is reserved for crazy tight tolerances. Water based coolant technology has really advanced over the past 30 years but in days of old, oil-based was dominant.