• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

BroncoBub Build

OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
OK changed the springs around without damaging anything. Thanks again, Paul!
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Well, not exactly disastrous maybe. But at least now you don't have to make up a great story about the Bigfoot sighting in your neighborhood forcing you to throw them on in reverse so you could join the mob quickly and hang your burning torches from the shackles better with the extra support while allowing you to travel in reverse safely and securely with the best torch-view possible, every time someone points out that "hey buddy, did you know your springs are on backwards?" and stuff like that.;D:eek:;)

Actually I can't take credit for it. Was talking to another member and they asked about it. Good eyes here all the way around!

Paul
 
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Before and after pictures of the rear.
 

Attachments

  • 20210226_153211.jpg
    20210226_153211.jpg
    137.4 KB · Views: 99
  • 20210324_172908.jpg
    20210324_172908.jpg
    95 KB · Views: 87
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
New 3.50 rear gear set came in today.
 

Attachments

  • Message_1616695147140.jpg
    Message_1616695147140.jpg
    86.2 KB · Views: 59
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Pumpkin

After cleaning up the inside of the rear carrier (pumpkin) would this be a indication that the outside may have the same color as the inside?
 

Attachments

  • 20210325_140157.jpg
    20210325_140157.jpg
    89.5 KB · Views: 80
  • 20210325_140203.jpg
    20210325_140203.jpg
    163.5 KB · Views: 72
  • 20210325_140219.jpg
    20210325_140219.jpg
    136.7 KB · Views: 80

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
It was not unusual for the inside of the carrier to be painted, I've taken plenty apart that were painted, however if they were wet inside I've seen them rusted where they were a solid iridescent color so its hard to say.
 
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
It was not unusual for the inside of the carrier to be painted, I've taken plenty apart that were painted, however if they were wet inside I've seen them rusted where they were a solid iridescent color so its hard to say.

Ok I got you!
 

svastano

Contributor
Bronco Guru
Joined
Apr 8, 2017
Messages
1,379
Loc.
Pulaski, PA
The red paint is most likely a product called Glyptal. it was used a lot in cast. All of my old John Deere's had the stuff painted on the inside of the cases. An old timer told me that some of the castings were so porous that the oil would seep out thru them and that is why they painted it with this stuff:

https://www.eastwood.com/glyptal-red-enamel.html?SRCCODE=PLA00020&msclkid=c24f0e3f870e146e5c226e62afde2508

After cleaning up the inside of the rear carrier (pumpkin) would this be a indication that the outside may have the same color as the inside?
 
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Got the 9" all buttoned up. New gears, ring & pinion
seals. Next up new axle seals and install axles and rear brake drums.
 

Attachments

  • Message_1617386707046.jpg
    Message_1617386707046.jpg
    113.9 KB · Views: 92
  • 20210402_130615.jpg
    20210402_130615.jpg
    103.8 KB · Views: 118
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Brake drums installed.
 

Attachments

  • 20210403_151826.jpg
    20210403_151826.jpg
    115.2 KB · Views: 87
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Was able to finish up on the rear drum brakes today and currently installing hard brake lines.
 

Attachments

  • 20210404_154147.jpg
    20210404_154147.jpg
    96.7 KB · Views: 78
  • 20210404_154412.jpg
    20210404_154412.jpg
    80.5 KB · Views: 79
  • 20210404_154422.jpg
    20210404_154422.jpg
    111.8 KB · Views: 77
  • 20210404_172238_HDR.jpg
    20210404_172238_HDR.jpg
    105.6 KB · Views: 75
  • 20210404_194416.jpg
    20210404_194416.jpg
    127.8 KB · Views: 73
  • 20210404_194425.jpg
    20210404_194425.jpg
    120.8 KB · Views: 89
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
More progress, started installing Dana 44, shocks and control arms.
 

Attachments

  • 20210409_153554.jpg
    20210409_153554.jpg
    148.5 KB · Views: 84
  • 20210409_153542.jpg
    20210409_153542.jpg
    80.4 KB · Views: 70
  • 20210409_142438.jpg
    20210409_142438.jpg
    136.2 KB · Views: 78
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Since I screwed up the left steering knuckle on the Ford F150 I bought it off of I went with the gm setup. Test fitted everything and so far so good.
I just have to grind some of the knuckle down so the caliper can have back and forth movement. Now I'll just have to sell off the ford conversion parts I bought.

Edit: Went back to the all Ford disc setup thanks to forum member Joe31969. He had the left knuckle I was needing and sent it to me..Thanks very much Joe!!!
 

Attachments

  • 20210415_125544_HDR.jpg
    20210415_125544_HDR.jpg
    74 KB · Views: 76
  • Message_1618509306580.jpg
    Message_1618509306580.jpg
    97.5 KB · Views: 72
  • Message_1618509321849 (1).jpg
    Message_1618509321849 (1).jpg
    112.8 KB · Views: 60
Last edited:
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Completed the rebuild of the Dana 20.
 

Attachments

  • dana20rebuild.jpg
    dana20rebuild.jpg
    133.2 KB · Views: 79
  • dana20vis.jpg
    dana20vis.jpg
    19.5 KB · Views: 58
  • dana20complete.jpg
    dana20complete.jpg
    77.4 KB · Views: 57
Last edited:
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
More progress except I have the wrong caliper on the passenger side.(as of this post I corrected it) Installed the passenger side disc brake conversion with all ford parts. Just for grins I installed the rim and hub cap. Drivers side tomorrow.

Bub
 

Attachments

  • caliperview.jpg
    caliperview.jpg
    171 KB · Views: 65
  • closeuphubcap.jpg
    closeuphubcap.jpg
    65.2 KB · Views: 61
  • caliperview2.jpg
    caliperview2.jpg
    173.5 KB · Views: 66
  • fronthubcap.jpg
    fronthubcap.jpg
    145.5 KB · Views: 65
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Have a rolling chassis again.
 

Attachments

  • frontend1.jpg
    frontend1.jpg
    226.9 KB · Views: 69
  • frontend3.jpg
    frontend3.jpg
    240.5 KB · Views: 72
  • frontend7.jpg
    frontend7.jpg
    182 KB · Views: 63
  • frotnend9.jpg
    frotnend9.jpg
    188.2 KB · Views: 74
  • frontend5.jpg
    frontend5.jpg
    194.5 KB · Views: 62
  • frontend6.jpg
    frontend6.jpg
    188.6 KB · Views: 65
Top