• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Custom speaker enclosures

Ospecial1

New Member
Joined
May 9, 2017
Messages
9
Loc.
Dallas, Texas
Does anyone have a detailed instruction of how to build one of these? There seems to be a lot of want for them but no one to build them and I would like to build one for myself.
 

suckerpunched

Sr. Member
Joined
Aug 24, 2006
Messages
882
I have quite a few pictures of how I did mine on my build thread. there is a link to it one page back on this thread. I really like the way they look, but Once you build a set for yourself, you will see why nobody is willing to build them for other people. Actually I think there are too many variables to be able to pull it off without actually having the bronco. they end up fitting pretty tight, I don't think you could necessarily pull mine out and expect them to fit the next Bronco. then there are vehicle specific obstacles that need clearance like roll bars, carpet, and the inside of any exterior trim clips could interfere with fit. Look at my thread, watch youtube videos. you can do it, but it is time consuming .
 
Last edited:

ObscureMachine

Seatbelt Orifice Officer
Joined
Sep 28, 2006
Messages
3,998
Loc.
World Headquarters
Does anyone have a detailed instruction of how to build one of these? There seems to be a lot of want for them but no one to build them and I would like to build one for myself.

There are all kinds of videos on youtube about how to build fiberglass speaker setups like this. - jim
 

rydog1130

Contributor
Bronco Guru
Joined
Jun 19, 2014
Messages
4,188
Does anyone have a detailed instruction of how to build one of these? There seems to be a lot of want for them but no one to build them and I would like to build one for myself.

Use masking tape and cover your inner quarter panel, then build up about an 1/8" layer using chop strand, when it dries pop it out then watch a few videos on you tube like jim mentioned and build your own, they use wooden speaker rings, dowles, hot glue, and speaker cloth to get the shape down then let it dry, after that its all about building it up, sanding it smooth, then painting them up!
 

centex77

Full Member
Joined
Oct 31, 2017
Messages
183
Building a fiberglass box is easy but it's messy and time consuming. Just make sure you incorporate a way to attach it to the body. Always an easily forgotten item.
 

Ospecial1

New Member
Joined
May 9, 2017
Messages
9
Loc.
Dallas, Texas
How to Mount?

I have quite a few pictures of how I did mine on my build thread. there is a link to it one page back on this thread. I really like the way they look, but Once you build a set for yourself, you will see why nobody is willing to build them for other people. Actually I think there are too many variables to be able to pull it off without actually having the bronco. they end up fitting pretty tight, I don't think you could necessarily pull mine out and expect them to fit the next Bronco. then there are vehicle specific obstacles that need clearance like roll bars, carpet, and the inside of any exterior trim clips could interfere with fit. Look at my thread, watch youtube videos. you can do it, but it is time consuming .

How did you mount them to the body? Self Tapping Screws?
 

suckerpunched

Sr. Member
Joined
Aug 24, 2006
Messages
882
2 bolts one front one rear through the back of the speaker box and through the flat part of the inner panel. Installed with speakers out so I could reach in there and put it together. used a large flat washer and nylock nut inside the box and a little extra fiberglass in that area. I also glued a few thin patches of of house type fiberglass insulation to the back of the box to try a prevent it from rattling against the sheet metal. I don't know if it helped, but it doesn't rattle.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Anybody ever gone to the trouble of cutting a hole in the inner panel adjacent to the speaker, than another one up above (basically behind the dash) and creating a backer panel to enclose the whole thing to make a "speaker chamber" basically?

I'm guessing the effect is likely minimal, but it's otherwise just wasted space between the kick panel and the outer fender/wheel well.
I know some have put the main hole with a backer (stainless bowl/pot the last time I saw one) but not sure if anyone has used any other designs.

Not sure we've had feedback yet on the ones that used the bowls either, now that I think about it! Where's the sonic acoustic reports people?;D

Paul
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
I recall that ss dog bowl dish somebody used as a speaker enclosure on the kick panel. Excellent idea.
They coated the bowl with either that thick peel and stick paint or maybe some stick on dyna mat. Obviously a ss bowl is not acoustically appropriate. But after he got it coated and sealed he really liked the sound.
I thought it was pretty neat myself.
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
Building these enclosures has been a chore. Now i just spent $500 in wires to run 2 amps that barely fit under the passenger seat. I am making a amp rack thats 12" x 20" that fits under the seat out of 1/2" cutting board. 2 JL amps will mount on top of the rack and below ill mount the 4 crossovers and the Fused distribution block. Its a tight squeeze. After all this work i just hope it pounds loud enuf that you cant breath. Only drawback of the bronco.....the 35 amp alternator. Ill have to addres this isssue down the road. Hard to find any stores these days that even sell audio accesories and such. I had to buy everything so far online which is sad.
 
Last edited:

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
Made these to accommodate the roll bar. Ain't know way the guy making those really nice ones can charge enough!

TRUE THAT! Go ahead...break in and steal the speakers....thank god the roll cage keeps the enclosures from walking off. You can replace a grand worth of subs but you surly cant replace the enclosures that took you a year or two to build.
 

KeithKinPhx

Sr. Member
Joined
Jan 8, 2017
Messages
451
Just watched a video on how to build these enclosures. They technique on how to make it work in the rear quarter Wells is near the end.

https://youtu.be/1Kf8IkJJbMw

Definitely something to do one day. I think it gives the Bronco a finished modern look.
 
Top