• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

E-brake alternative advice

nickeboy

Contributor
Sr. Member
Joined
Apr 15, 2007
Messages
398
Due to some mods and upgrades, I cannot use a standard ebrake. I'm thinking of using a hydraulic brake lock system. Mico makes a lever type. Any issues that I may run into? Have any of you done this?
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,110
A hydro park brake is no good. the miniscule amount of fluid that actually moves in the lines means if a drop or two leaks back through the valve the brake will release. Don't fool yourself, and those around your vehicle into thinking you have a park brake without a proper cable actuated park brake.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Only issues are that it's not legal as an alternative if you have inspections in your state.
Other than that, I'm certainly no expert but can't think of any real bad things about them. As long as your rear brakes work well, the Mico lock should as well.

Don't substitute it for a good sized rock under a wheel if you find yourself parking on a steep hill somewhere though!;D

Paul
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Well, I'd go with his statement first. I should have asked if this is a street driven rig and a daily driver. When you said you made mods that precluded a standard parking brake, I figured you had a trail rig.

And speaking of which... Just what did you do?

Paul
 
OP
OP
nickeboy

nickeboy

Contributor
Sr. Member
Joined
Apr 15, 2007
Messages
398
Hmmm. Ok, I'm going to have to try to reconfigure some things. I want a solid setup. Thanks for the input.
 

68rockcrawler

Bronco Guru
Joined
Sep 18, 2006
Messages
1,417
The hydraulic 'lock' is better as a line lock for racing or occasionally used as an anti-theft device.

Here is something that I would trust more:

http://www.partsmike.com/index.php/...ake---atlas-and-hd-outputshaft-transfer-cases

I just installed that parking brake last winter so I've only got to test it out a couple of times. Naturally with a Bronco everything about it had to be custom, from the linkage from the cable, to the mounting brackets, to the return spring. I have not tried it to the extreme yet so I can't say whether I recommend it. All I can say is it's a lot of work to put it on a Dana 20. It is pretty simple on an Atlas though since everythign that came with it was for mounting to an Atlas.
 

00gyrhed

Bronco Guru
Joined
Aug 3, 2006
Messages
2,428
i didn't want one on the floor so I mounted a handbrake horizontally under the dash. I like it but i am the only one in the family that could actually bring it to ta stop. They take some upper body strength.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
I just installed that parking brake last winter so I've only got to test it out a couple of times. Naturally with a Bronco everything about it had to be custom, from the linkage from the cable, to the mounting brackets, to the return spring. I have not tried it to the extreme yet so I can't say whether I recommend it. All I can say is it's a lot of work to put it on a Dana 20. It is pretty simple on an Atlas though since everythign that came with it was for mounting to an Atlas.

To mount it on a Dana 20 you first put the AA HD rear output on the Dana 20

The AA HD rear output for the Dana 20 is the same as the Atlas rear output.

The AA HD rear output for the Dana 20 is an excellent idea on its own, even without this brake.
 

68rockcrawler

Bronco Guru
Joined
Sep 18, 2006
Messages
1,417
To mount it on a Dana 20 you first put the AA HD rear output on the Dana 20

The AA HD rear output for the Dana 20 is the same as the Atlas rear output.

The AA HD rear output for the Dana 20 is an excellent idea on its own, even without this brake.
Oh shoot I see it now. I had their HD output shaft that put in my stock housing. That sure would have made it easier!

Sent from my XT1254 using Tapatalk
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Sykanrong, is this kit what I would need?
http://www.bjsoffroad.com/Dana-20-Rear-Output-Shaft-Upgrade-Kit_p_1579.html

I'm pretty sure I have old caddy rear disc brakes. I don't see where I'd hook up any ebrake to it. I'm going to take to a local bronco guy tomorrow to see what his opinion would be. If I posted a pic of the rear end, could anyone help?

It says "WILL NOT FIT FORD DANA 20" in the instructions.

That brake kit said you need the Advance adapters HD output kit.
 
OP
OP
nickeboy

nickeboy

Contributor
Sr. Member
Joined
Apr 15, 2007
Messages
398
Anyone know what setup this may be from? It is on a 9" floating 31 spline axle. Better yet, can I put an ebrake on it?
 

Attachments

  • image.jpeg
    image.jpeg
    186.5 KB · Views: 154

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Looks like BC's kit.

You can buy the cables from BC too.
Those appear to be Caddy calipers so you have the internal parking brake mechanism but you still need the exterior bracket and spring.

Just look up the image of a caddy caliper and you will see what I'm talking about.

79-85 Seville.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,110
Anyone know what setup this may be from? It is on a 9" floating 31 spline axle. Better yet, can I put an ebrake on it?
As stated above, GM metric calipers. Looks like they are park brake calipers just missing the external parts. Unless something changed in the past few years, some of the brackets are now obsolete and you need to find them used.
 

sykanr0ng

Bronco Guru
Joined
Aug 11, 2014
Messages
5,363
Sykanrong, is this kit what I would need?
http://www.bjsoffroad.com/Dana-20-Rear-Output-Shaft-Upgrade-Kit_p_1579.html

I'm pretty sure I have old caddy rear disc brakes. I don't see where I'd hook up any ebrake to it. I'm going to take to a local bronco guy tomorrow to see what his opinion would be. If I posted a pic of the rear end, could anyone help?

This one:

http://www.wildhorses4x4.com/product/Extreme_Dana_20_Output_System_Complete_Kit_Assembled

or this one:

http://www.wildhorses4x4.com/product/Extreme_dana20_Output_System

are the ones.
 

pbwcr

Sr. Member
Joined
Jul 11, 2007
Messages
652
I have used the Cad disk brake from BC on my 72. And I have the Varga/Ford on my 96 Both work fine, but are not as strong as the old drum brake setup. Both the above were on 9" with big bearing. Source the Varga from SVT Mustang or the superbird Mustang. I like the varga best.
Cable is no big deal just splice the stock cable to the JY cable that came with the Varga. The BC is a kit and is an easier install.
 

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
I have the bc kit on a 77 floating rear. They do use the caddy calipers with an e-brake. If u have the correct calipers I was able to buy the parts to hook the cables up at the dealer in a nice kit. I think it's just the bracket ,spring and nut. Bc hat tips for adjusting the e-brake on their site.
 
Top