• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

FiTech EFI pre-order info

old 71

Full Member
Joined
May 11, 2013
Messages
161
I could be in as well ,already a good price compared to the others but a little more would be sweet.
 

jmangi62

Bronco Guru
Joined
Jul 28, 2013
Messages
2,512
I'm interested in this also,was looking to do the Fast EZ EFI but that's waaay down the road,too many other things to get done first.I like the price of this one too.:cool:
 

AZ73

Bronco Guru
Joined
Mar 28, 2012
Messages
3,813
I'm in if there's a deal, else I'll wait to buy it later, but wondering if I need the fuel management system instead of just running a high pressure fuel pump with a return line.
 
Last edited:

RedLeg0811

Sr. Member
Joined
Aug 12, 2006
Messages
837
Loc.
Maltby, WA
This is really intriguing... I read the write-up on the corvette forum.

I wonder if you have to run that touch-screen or if you can disconnect it after the system is setup and installed.


I read the FAQ. You can disconnect it or keep it connect up to you.
 

ChrisC74

Sr. Member
Joined
Dec 9, 2010
Messages
906
I'm in if there's a deal, else I'll wait to buy it later, but wondering if I need the fuel management system instead of just running a high pressure fuel pump with a return line.

I can give you feedback after this weekend on this. They say you need 58PSI, I have an Airtex 2000 feeding my Howell system which I am pulling to install this system.

I bought their high pressure pump / tank deal that goes in the engine compartment but plan on installing that later.

The Airtex is 70-95 PSI at the pump so it is going to be marginal at the throttle body... but it is already installed with a supply and return line...
 

RedLeg0811

Sr. Member
Joined
Aug 12, 2006
Messages
837
Loc.
Maltby, WA
I am super interested in this and read through there whole website. I would be interested in a group buy on this. Unlike another install I could get this going super quick. Very excited about this. Only hesitation is the 600HP and under is not out yet, so no reviews.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,625
Loc.
PNW
Everything they describe in the sales info sounds good for this TBI unit... my only concern about a start up company or even when Holley came out with their ProJection unit back in the early '90's is support, both technical and with parts down the road.

1st potential issue: I bought a ProJection unit back then, it worked well. I needed a part a couple years later and when talking to a Holley engineer he stated that they wouldn't be supporting that technology much longer...that's when I sold the unit. I still have the Bronco...

2nd potential issue: ECU replacement availability and cost. Most of the TBI units use OE style off the shelf sensors-great easy and cheap replacement for the common failure. What happens if the ECU dies? $$$$ I'd decided on the new Holley Terminator TBI until I asked a technician at Holley what a replacement ECU would cost if one died after the 6month warranty was up... A THOUSAND DOLLARS...holy crap, $1,000.00 to replace the ECU. I ran away from any aftermarket and went with '89-93 Fox SEFI system.

I have no idea how much a Fitech replacement ECU costs OR if they'll even be in business in 3 yrs, much less another 20 years.

Hope this helps someone.
 

BroncoKelley

Jr. Member
Joined
Aug 18, 2011
Messages
131
Loc.
Billings, Montana
The ECU does concern me a little and it is mounted right on the unit, however, it states on the website that the TPS, IAC, and ECT are all GM parts and the O2 is bosch.
 

drock

Sr. Member
Joined
Aug 11, 2012
Messages
492
Looking forward to an install write up. Others have had good results so far.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,625
Loc.
PNW
Looking forward to an install write up. Others have had good results so far.

Absolutely not bashing at all...just a heads up is all.

Good luck, I hope it works great.
 

bteutsch

Sr. Member
Joined
Jan 11, 2009
Messages
875
You can disconnect it. The handheld computer that is. After the initial setup it's not necessary. I left mine hooked up and used the included window mount. Just so I can play around with it.
 

drock

Sr. Member
Joined
Aug 11, 2012
Messages
492
You can disconnect it. The handheld computer that is. After the initial setup it's not necessary. I left mine hooked up and used the included window mount. Just so I can play around with it.

Any updates with your system?
 
Top