Well I got my christmas present installed and running, the Go Street 400HP kit. I am shocked at how nice it is.
;D
Zoom Zoom, the rebuild is purring like a kitten. Anybody want to buy a carburetor? It only took a day or so to actually install after a two weeks of gathering parts and planning. Thanks to everyone on here for help in the planning. I am running a frame mounted fuel pump connected to just the stock 12 gal tank, the aux tank has been abandoned in place. Hopefully I'll be getting a 23 gallon here in the future (and headers). I ran a new line down the passenger side of the frame for the return line and tied it into the main tank vent line. Only issue there is the vent line is 5/8 and I have -6an hose (3/8) so finding a tee was impossible. I ended up using a 1/2x1/2x3/8 tee and just cinching down the hose clamps. No leaks in the first test starts and drive. only other hiccup is the air cleaner stud is a different size!!! off to Napa again....
So do I need to think about any tuning issues or just let it do its thing? It's a daily driver.
Jason
So do I need to think about any tuning issues or just let it do its thing? It's a daily driver.
Jason











