It's time to choose gears.
Back ground, mostly crawling but want to be able to drive to most trails (1-2 hr max travel time).
37's, 302 with Mustang EFI, ZF-5 speed. Atlas 4 speed (2.7:1, 4.3:1, 11.7:1),so crawling gears aren't even a considerations. I'm running 3.5 gears and have everything I want offroad.
Chart below is based on the following:
2300-2900 RPM is ideal.
2200 RPM is marginal on the low end- I can still accelerate to higher RPMs on hills, below this I can't.
3000 RPM is marginal on the high end- It's ok, but feels like I don't want to hang around or go much higher. Maybe I'm a wimp, feel free to tell me I'm wrong
How much of a concern is the strength of gears compared to the gear ratio? I've been told the higher gear ratios are weaker. Is this a real issue? Some of the club members (running big gear ratios and tires) said this is outdated info and not a real big concern.
Looking for input. Bonus points if you are running a similar set up.
Back ground, mostly crawling but want to be able to drive to most trails (1-2 hr max travel time).
37's, 302 with Mustang EFI, ZF-5 speed. Atlas 4 speed (2.7:1, 4.3:1, 11.7:1),so crawling gears aren't even a considerations. I'm running 3.5 gears and have everything I want offroad.
Chart below is based on the following:
2300-2900 RPM is ideal.
2200 RPM is marginal on the low end- I can still accelerate to higher RPMs on hills, below this I can't.
3000 RPM is marginal on the high end- It's ok, but feels like I don't want to hang around or go much higher. Maybe I'm a wimp, feel free to tell me I'm wrong
How much of a concern is the strength of gears compared to the gear ratio? I've been told the higher gear ratios are weaker. Is this a real issue? Some of the club members (running big gear ratios and tires) said this is outdated info and not a real big concern.
Looking for input. Bonus points if you are running a similar set up.
Attachments
Last edited:











