• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Hard braking

White Horse

New Member
Joined
Jan 25, 2026
Messages
1
I am working on a 1975 Bronco. I have been a jeep guy for much of my life, and this is my first Bronco. As a result, I am not in familiar territory. It has drum brakes all around and from the looks of things, many original parts. I have to push the brake pedal almost to the floor with much effort to get the brakes to engage. I have replaced the rear brake lines and front wheel cylinders and still have the problem. All lines have been bled and seem to have no air. Looking for suggestions and guidance.
 

acropilot

Contributor
New Member
Joined
Sep 16, 2022
Messages
41
Your MC bore size should be 1”…if it is bigger you’ll get a firm pedal but not much braking due to not enough line pressure.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
I am working on a 1975 Bronco. I have been a jeep guy for much of my life, and this is my first Bronco. As a result, I am not in familiar territory. It has drum brakes all around and from the looks of things, many original parts. I have to push the brake pedal almost to the floor with much effort to get the brakes to engage. I have replaced the rear brake lines and front wheel cylinders and still have the problem. All lines have been bled and seem to have no air. Looking for suggestions and guidance.
Adjustment, er, non-functional self adjusters come to mind.
Replaced front wheel cylinders, leaking? Did you replace the shoes as well?
How large of a tire are you running?
 

bknbronco

Bronco Guru
Joined
Jan 17, 2011
Messages
4,388
Loc.
North Metro, MN
did you figure it out? first thing i would do is jack up the bronco and adjust the brakes until there all similar in drag. tighten until they just slightly rub. I ran 4 wheel manual drums with 33" and 35" tires for many years. stopped on a dime......just not very predictable which way its gona go in a emergency
 
Top