• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Kickdown Cable Linkage

jeremywatco

Full Member
Joined
Feb 8, 2019
Messages
305
Loc.
San Diego, CA
Hi there,

Got a new kickdown cable & linkage kit from WH... didn't come with instructions. The instructions online didn't match the parts that I was sent. I rigged it up like this.. it works but doesnt look right... anyone running a kickdown cable with a Holley that could share a pic or some guidance? Please ignore my wired up throttle rod.. thats temporary :)

Thanks, Jeremy

IQS03tjDGQ7JQI6FPhCJWJbKAQXr2f_SPxcr0as_cWHxdls
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Hey Jeremy. Sorry I can’t help with the adjustment, but I would think that it follows closely the factory adjustment with the solid rod.
Do you have a shop manual that might detail that procedure?
Probably a matter of setting it to hit the limit at just the right throttle angle.
But I can’t say I’ve ever tweaked with the automatics. So just a wild guess on my part.
 
OP
OP
J

jeremywatco

Full Member
Joined
Feb 8, 2019
Messages
305
Loc.
San Diego, CA
Thanks for the reply. I was more looking at the mounting and routing of the cable itself. I have it adjusted good and seems to be working properly I just feel that it’s not mounted up correctly.
 
Top