• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

LOWERING my Bronco

OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Nothing at all. I just thought the 9" would be stronger for the DOHC. They both have posi and the disc brakes, as well as 31 spline axles and the 5 x 4.5 bolt pattern. The Explorer/Mountaineer (59 5/8") is still a great setup, but the 9" is slightly narrower (58") so I can run a little wider tire in the back.
 
Last edited:

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
well yet another thing to look for at some point in time. if I wish to go bigger with the tires, we shall see though. There is not a lot of room to go bigger with the bag mounts and keeping the stock bed.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I just happened to come across the car while I was looking for a vehicle for my son. I have kept an eye out for this rear end for a few years, and the car was in the area. Otherwise the 8.8 is a great axle for this project. Using the Mustang type wheels with the modern offset still allows for quite a bit of versatility. No worries Bill!
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
One other new item of interest. After doing some reading on the Mark VIII DOHC engine, I learned one upgrade is the 96-98 Cobra intake. It bolts right up to this engine. I did a little searching, and found one in great shape. It doesn't help me out with the header problem I am facing. but any news is good news...right?
 

Attachments

  • COBRA LOWER.jpg
    COBRA LOWER.jpg
    19.3 KB · Views: 76
  • COBRA UPPER.jpg
    COBRA UPPER.jpg
    17.8 KB · Views: 73
  • COBRA UPPER 1.jpg
    COBRA UPPER 1.jpg
    20 KB · Views: 53

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
yep anything to keep the interest. Rainy here today so I could not do any repainting . lots to do this weekend if the weather holds.
 

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
The frame repaint has not happened at this time. I thought I would look at the steering issue with the engine stand.
There are some large spacers that I am going to assume they go on the crossmember to space the steering rack out away from the crossmember for some clearance. Any thoughts.

The other pic is of the steering angle to the engine stand.

The last pic is of the underside coated with the dp90lf primer and then top coated with por15 chassis black. There are some spots that need touch up, it was hard to see what was coated and what was not.
 

Attachments

  • DSC02414 (Medium).JPG
    DSC02414 (Medium).JPG
    58.7 KB · Views: 70
  • DSC02416 (Medium).JPG
    DSC02416 (Medium).JPG
    43.1 KB · Views: 65
  • DSC02417 (Medium).JPG
    DSC02417 (Medium).JPG
    41.8 KB · Views: 68
  • DSC02409 (Medium).JPG
    DSC02409 (Medium).JPG
    61.6 KB · Views: 86
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
That is why I modified the mounts I used. My setup will be entirely different as I will drop the engine 1-3". I have to find a header that will work also. Sanderson will custom bend the passenger side header, but they want the original one back and would still cost $200 for one header. I hope to get something done here soon, but I have to sell the parts I bought that won't work first!:(
 

broncomitch

Bronco Guru
Joined
Jan 17, 2008
Messages
2,384
Loc.
west jordan, utah
:cool:

Not only can it be done, it has been done (see post #281 ). I think I have more pics of the stock Mustang II setup on a Bronco somewhere...but seriously, let me know if you want to get rid of that Versailles setup...;D
did he cut the front off and weld it on or cut everything off and weld it on the bronco frame? a cant see a weld seem on the frame. think i might start looking for another bronco
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Well it looks like I found what I was looking for on craigslist. Ford Racing shorty headers and the price was right. A little cutting, trimming, extending, and rotating, and they will fit. Stay tuned for the details...
 

Attachments

  • FORD RACING HEADERS.jpg
    FORD RACING HEADERS.jpg
    82.8 KB · Views: 56
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Back in the saddle!

We're back in business! I got the headers AND the Cobra intake today. Now I have something that I can actually put in my hands and and cut and form. I should have a update later in the week. I am pumped!
 

Attachments

  • COBRA 4.JPG
    COBRA 4.JPG
    206.2 KB · Views: 40
  • COBRA 2.JPG
    COBRA 2.JPG
    166.8 KB · Views: 33
  • FORDRACE 1.JPG
    FORDRACE 1.JPG
    226.1 KB · Views: 41
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I had just enough time for a test fit tonight. I like what I see so far. It looks like both headers will have to be reworked to turn them inside the frame rails, but now there will be plenty of room for the steering on the driver's side. We will be trimming the engine stands down and tack welding them in this weekend. I also found a clockable starter. It is a Hitachi Enforcer high performance starter (thanks Dennis/dnewman9) part # PSL104. It is 146.98 shipped.
 

Attachments

  • New Head 1.JPG
    New Head 1.JPG
    221.3 KB · Views: 97
  • New Head 2.JPG
    New Head 2.JPG
    208.6 KB · Views: 81
  • New Head 4.JPG
    New Head 4.JPG
    203.6 KB · Views: 84
  • New Head 5.JPG
    New Head 5.JPG
    228.4 KB · Views: 85

sstlaure

Bronco Slacker
Joined
Jun 7, 2004
Messages
1,881
Wow...that's cheap for a clockable starter. I could only find the high dollar units, so I pocketed my frame and used a stock starter.
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Wow! I ordered the starter when I got home last night, and it was on the step when I got home this afternoon! I know it was only 50 miles away, but that is still FAST service to me!
 

Attachments

  • HITACHI 1.JPG
    HITACHI 1.JPG
    161.4 KB · Views: 54
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
I hope to have an update this weekend. I bought a different set of motor mounts, as I was tied of cutting and fitting to get the motor centered and still clear the steering shaft. The plan will be to have the motor and steering rack mounted, and be able to concentrate on the transmission crossmember. If we get that buttoned up this week, it's on to the 4 link (if I don't change my mind...again!).
 
OP
OP
greatguy57078

greatguy57078

Contributor
Bronco Guru
Joined
Jul 15, 2006
Messages
3,430
Back to work on the project tomorrow morning. I got the new mounts (Tin Man Fabrication in MN) yesterday (Happy Birthday to ME!). Now I need to find a crossmember for the TR3650 5 speed. Yeah, it's always something!
 

Attachments

  • New 4.JPG
    New 4.JPG
    231 KB · Views: 48
  • New 5.JPG
    New 5.JPG
    158.7 KB · Views: 37
  • New 6.JPG
    New 6.JPG
    164.6 KB · Views: 34

behemoth

Bronco Guru
Joined
Jul 2, 2003
Messages
1,736
I like these engine mounts they appear to have a whole lot of options built in them. Just a little cut and grind to get them where you wish.

My project is sitting in the garage still on the wooden blocks and jack stands. The weather has been wet lately and not allowing a whole lot of work to be done.

I need to cut out the notch for the steering shaft and some other things.
 
Top