• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Need some quick help (Disc Brakes)

LukeB

New Member
Joined
Sep 29, 2012
Messages
23
Loc.
Suisun, Ca
just got to working on my chevy disc brake conversion.
Anyways the boxes I got from wild horses are marked right and left side.
Started on the passenger or right side. both of the caliper brackets are stamped cb6675 and they are the same. Should they be different or is it just the calipers that are different from side to side? I'll have a beer and wait for a reply. i don't want to go any further if i have 2 of one side.
Luke
 

ENDLIFE

Sr. Member
Joined
Nov 17, 2011
Messages
453
The calipers are side specific, as the bleeder screws should be facing up.
 

garberz

Bronco Influencer
Joined
Jun 24, 2007
Messages
6,864
Loc.
Conejo Valley, Ca.
Looking at this picture from TBP's, it looks as if the caliper brackets are side specific.
 

Attachments

  • 7503.jpg
    7503.jpg
    38 KB · Views: 100

Jebus

Full Member
Joined
Feb 13, 2011
Messages
303
Loc.
Longview, WA
Look closely at the caliper brackets where the caliper sets into them, I believe you will see that to get the calipers orientated correctly, you will see the side that each goes on...
 
OP
OP
LukeB

LukeB

New Member
Joined
Sep 29, 2012
Messages
23
Loc.
Suisun, Ca
Called wild horses today. They said that the caliper brackets are not side specific.
Luke
 
Top