ChrisC74
Sr. Member
- Joined
- Dec 9, 2010
- Messages
- 906
If you are running a Edelbrock Pro Flo 4 EFI can you please let me know what in tank pump you are running and if you are using an external regulator.
I am considering switching from a Fitech to the Pro Flo and currently have an Aeromotive 11540, 340 stealth series high flow pump and use the internal regulator and return line.
Additional information, I have run the Fitech for years, have had had a professional check the install, had several knowledgeable folks help tune it and for the most part it runs very well. There are still a couple of annoying issues I cannot seen to tune around and have need intrigued by the Pro Flo for a while so I am going to give it a try.
I ran the same Fitech on my second bronco, similar engine, same pump, etc and it ran spot on. So it very well could be a hardware issue but it is years old and out of warranty so it is time to try a newer system.
Thx.
Sent from my SM-G970U using Tapatalk
I am considering switching from a Fitech to the Pro Flo and currently have an Aeromotive 11540, 340 stealth series high flow pump and use the internal regulator and return line.
Additional information, I have run the Fitech for years, have had had a professional check the install, had several knowledgeable folks help tune it and for the most part it runs very well. There are still a couple of annoying issues I cannot seen to tune around and have need intrigued by the Pro Flo for a while so I am going to give it a try.
I ran the same Fitech on my second bronco, similar engine, same pump, etc and it ran spot on. So it very well could be a hardware issue but it is years old and out of warranty so it is time to try a newer system.
Thx.
Sent from my SM-G970U using Tapatalk











