Ethansdad73
Bronco Guru
- Joined
- Apr 8, 2008
- Messages
- 1,630
Hey guys I got this question from a new member in my private message box. I see that he has yet to make any post so I am looking to see if we can get an answer for him.. here is the question:
I wanted to reach out to see if you have an answer for what this guy did to the ignition system. He put in a new coil, distributor (no more points) and Duraspark ignition control module, and starter.
What I'm left with is it turns over, there is apprx 9V a the +term of the coil (coil ohm out okay) but there is no spark?
I did put in a new ICM and had Advanced Auto test it before re-installing still no spark. What I'm seeing is while it does plug up to the old wiring harness the color codes are not the same and one of the plugs on the ICM only has two wires not 3 like the truck harness.
There are forums talking about 85 Bronco ignition systems but none on the 75. Did you have this issue or can you shed some light on your experience? I'm wanting to see her crank up then get to work on the rest of my restoration activities.
Thanks for your time if you respond and I will get this truck running and restored one way or another to drive!
Jim Rowe
I wanted to reach out to see if you have an answer for what this guy did to the ignition system. He put in a new coil, distributor (no more points) and Duraspark ignition control module, and starter.
What I'm left with is it turns over, there is apprx 9V a the +term of the coil (coil ohm out okay) but there is no spark?
I did put in a new ICM and had Advanced Auto test it before re-installing still no spark. What I'm seeing is while it does plug up to the old wiring harness the color codes are not the same and one of the plugs on the ICM only has two wires not 3 like the truck harness.
There are forums talking about 85 Bronco ignition systems but none on the 75. Did you have this issue or can you shed some light on your experience? I'm wanting to see her crank up then get to work on the rest of my restoration activities.
Thanks for your time if you respond and I will get this truck running and restored one way or another to drive!
Jim Rowe











