• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

question received via private message

Ethansdad73

Bronco Guru
Joined
Apr 8, 2008
Messages
1,630
Hey guys I got this question from a new member in my private message box. I see that he has yet to make any post so I am looking to see if we can get an answer for him.. here is the question:



I wanted to reach out to see if you have an answer for what this guy did to the ignition system. He put in a new coil, distributor (no more points) and Duraspark ignition control module, and starter.

What I'm left with is it turns over, there is apprx 9V a the +term of the coil (coil ohm out okay) but there is no spark?

I did put in a new ICM and had Advanced Auto test it before re-installing still no spark. What I'm seeing is while it does plug up to the old wiring harness the color codes are not the same and one of the plugs on the ICM only has two wires not 3 like the truck harness.

There are forums talking about 85 Bronco ignition systems but none on the 75. Did you have this issue or can you shed some light on your experience? I'm wanting to see her crank up then get to work on the rest of my restoration activities.

Thanks for your time if you respond and I will get this truck running and restored one way or another to drive!

Jim Rowe
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
The '75 duraspark harness and module is unique. You can't use a later module with that harness or a later harness with that module. '75 should have a green grommet. Make sure that is correct first.
 

Attachments

  • 75 SSI.JPG
    75 SSI.JPG
    49 KB · Views: 59

badmuttstang

redneck grease monkey
Joined
Oct 25, 2009
Messages
2,807
Not trying to hijack the thread but I have gotten a couple of PM's from others that have not made a single post just wondering why they don't just post a thread it's not that I don't want to help them I just find it odd that they wouldn't just ask everyone the same question.
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
IME, that's a common tactic for spammers, hackers, & trolls. IDK why this particular guy didn't post his Q, but I never reply to those types of messages, other than to say: post in the open forums.
 

badmuttstang

redneck grease monkey
Joined
Oct 25, 2009
Messages
2,807
Thats kind of what I was worried about to but giving them any response like telling them to post in the open forum is the same as trying to give them advise. So I try and answer their question and also tell them they should ask everyone but I never give them any personal info.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
There is also the 74 module with a brown connector which is different too.

it would be helpful if we knew which module he is trying to work with. We are assuming that his truck is a 1975 and has stock Duraspark for 1975. 1975 was the first year for 50 state Duraspark. California had it in 1974 and prior to that was points so his truck is earlier than that.
 
OP
OP
Ethansdad73

Ethansdad73

Bronco Guru
Joined
Apr 8, 2008
Messages
1,630
exactly why I posted his question here and not reply to the email that he left.
 
Top