• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Radius Arm Cunfusion

jdavisjr

Contributor
New Member
Joined
Nov 11, 2025
Messages
35
I am back to work on my 69 Bronco. The radius arm bushings are completely gone. (I have added a couple pictures). I have spent a lot time reaching posts on radius arms o_O I have to admit, I am some what confused. When I take the front end out, I would like to know what other fixes I should be considering. I purchased the Bronco last year knowing there were issues. It will be a daily driver and trail, 60/40. The previous owner installed a 3-1/2" suspension lift and a 2" body lift because of the 351w. Do I stay with the standard length or extended? Do I need to install drop down brackets, do i need to upgrade the tie rod and drag link? The confusion lies in, what is the proper geometry. What are the best practice's to ensure the Bronco will handle moderate offroad and highway speeds around 70 mph. I do appreciate the knowledge base of all you members and look forward to your comments.
 

Attachments

  • IMG_1834.jpeg
    IMG_1834.jpeg
    282.9 KB · Views: 78
  • IMG_1831.jpeg
    IMG_1831.jpeg
    143.1 KB · Views: 76

1969

Contributor
Bronco Guru
Joined
Feb 28, 2022
Messages
1,090
Loc.
Reno, NV
Definitely replace the radius arm bushings.. they are non existent.

As for what to do to your Bronco, I’d say that depends on your plans for it. How does it drive? How do you want or expect it to drive? What do all the other parts look like on the front end? Does anything else have play in it?
 

gr8scott

Contributor
Bronco Guru
Joined
Jul 1, 2011
Messages
1,890
OP
OP
J

jdavisjr

Contributor
New Member
Joined
Nov 11, 2025
Messages
35
I live in Denver and brought it so I can go trailing with friends. I drove it around town for a few weeks, got it up to about 55 mph, it likes to wonder a little bit nothing alarming. I decided I needed to replace the bushing. When I hit a bump I could feel the radius arm ends slam back and forth in the bracket, loud enough I thought something snapped. Its been sitting in the garage since. I just finished all the outside project on the house, so it is time to get busy on the Bronco. There are so many great places in Colorado to offroad, so I would guess I would trail blaze about 40% of the time, on moderate trails. I bought this for me because I retired last year. I have a decent shop and I feel comfortable doing a lot of work myself, allowing me to spend my money on parts. Because the axle is going to be dropped, I think it makes since to restore the entire front. That being said, what parts would you recommend be replaced in this restoration. I might also mention, I would like to take this to armature car shows some time in the future. Not sure if I will have the funds to take it to that level but I would like to try. I did read a post that do like to spend other members money. It is defiantly an investment.
 

ntsqd

heratic car camper
Joined
Jan 30, 2005
Messages
5,970
Loc.
Upper SoKA
What I would do: Longer radius arms with Johnnie Joints or Metal Cloak joints at the frame, Cut and turn the C brackets to get proper caster without needing caster correcting bushings (also maintains correct pinion angle), tuned Fox or Bilstein remote reservoir dampers (2" body at the rear, 2.5" body in front), longer trac-bar with at least one JJ or Metal Cloak joint on it.
 
OP
OP
J

jdavisjr

Contributor
New Member
Joined
Nov 11, 2025
Messages
35
What I would do: Longer radius arms with Johnnie Joints or Metal Cloak joints at the frame, Cut and turn the C brackets to get proper caster without needing caster correcting bushings (also maintains correct pinion angle), tuned Fox or Bilstein remote reservoir dampers (2" body at the rear, 2.5" body in front), longer trac-bar with at least one JJ or Metal Cloak joint on it.
I like this idea. If I implement these upgrades, can I use the existing tie rod and drag link and replace all the bushings or should I replace these also?
 

phyler

Jr. Member
Joined
Jul 14, 2007
Messages
80
Loc.
Denver area
Getting fresh bushings in is step one. From there, getting an alignment so you have your starting numbers is step two. Then you can start making choices. Cut and turn, new linkage, etc.

Lots of us around the Denver area. Some of us even drive ours on occasion. 🤣
 
OP
OP
J

jdavisjr

Contributor
New Member
Joined
Nov 11, 2025
Messages
35
Getting fresh bushings in is step one. From there, getting an alignment so you have your starting numbers is step two. Then you can start making choices. Cut and turn, new linkage, etc.

Lots of us around the Denver area. Some of us even drive ours on occasion. 🤣
(y)
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
Stock arms have worked since '66. Nothing wrong with them. The bushings, yes.
Long arms were the latest in long travel front suspension before people quit modifying them extensivly as play toys as the value went too high.

Are you wanting this affordably? A set of rubber bushings (the offset that exists now would be the correct choice) will get you back on the road. Doesn't really cost much. And they work pretty good.
Long arms will reach deep into the pocket. Generally paired with a set of springs all around and the latest in shocks. Since you are looking at road use add a sway bar to control the body roll that the long arms help generate.

I would drop in a set of rubber bushings, go drive it. Figure out what you really want. I once bought a big block F250 because I never owned a big block before and was going to have fun with it. Planned on a big honking engine. Fixed it up a little and drove it. Realized that was not the right choice for that truck. After driving it some, it just wanted to be a real nice stock truck. Didn't know that until I fixed a handful of problems and actually drove it around.
 
OP
OP
J

jdavisjr

Contributor
New Member
Joined
Nov 11, 2025
Messages
35
The individual i purchased it from used it to get to good hunting spots and, if I can believe it, drove from South Dakoda to Wisconsin twice a year to visit family. The bronco has a cruise control, it might be true. I do like the direction to replace bushings, take it for a ride and determine next step. The 351w sounds good and it runs well. Behind that is a C4 that also runs well. Thanks for all the help.
 

ntsqd

heratic car camper
Joined
Jan 30, 2005
Messages
5,970
Loc.
Upper SoKA
I based my suggestion on two EB's similarly outfitted that I know log some serious trail and highway miles. It certainly isn't the least expensive option, and not all of it is bolt-on stuff - some fab would be required.
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
I agree with ntsqd on his upgrades and with the installation of an anti-sway bar. Makes a huge difference with the installation of the long travel arms.

Drive it for a while... I probably drive mine more than most :). Nothing like putting a few hundred thousand miles on over 50 yrs to know how you want it to handle, accelerate, BRAKE, and how dependable you want it to be.

Yes, we ARE really good at spending people's money. Enjoy your rig. One thing nobody has mentioned yet is your engine combination. Denver and Colorado means lot's of elevation change... carb'd power plants don't do as well with your area than let's say, someone who owns this rig and wheels in Nebraska! lol

I'm headed towards a potential major expense, but ONLY if you notice a need for it when driving around getting used to your new rig. EFI adjusts for elevation changes w/o thinking about it. Carb's, not so much.
 
OP
OP
J

jdavisjr

Contributor
New Member
Joined
Nov 11, 2025
Messages
35
Thank you for all your comments on the radius arms.

I am getting ready to drop the front axle so I can replace the radius arm bushings. I am going to keep the original radius arms for now. Purchased the jacks needed to support the frame and the axle. I noticed the power steering box is mounted to the inside of the frame. The numbers on the top of the box indicates it is from a large Ford passenger vehicle or a truck in the 60' and 70'. At the time this was a highly popular budget conversion and if I do the math, this box is old. There is about 3 to 4 inches of play in the steering wheel. would it make since to replace it. After doing some research it is recommended to install a new box on the outside of the frame. Is this information correct? After looking at the pictures, any advice? Do I replace all of it, or just replace the bushings and steering stabilizer?

I look forward to your comments
 

Attachments

  • Picture 1.png
    Picture 1.png
    1.2 MB · Views: 88
  • Picture 2.png
    Picture 2.png
    1.2 MB · Views: 100
  • Picture 3.png
    Picture 3.png
    1.2 MB · Views: 75

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
F-100 box for PS was definitely an upgrade back in 1975 but not anymore. :)

Putting a new steering box in, whether it's a stock Bronco one or one of the aftermarket ones - that you can buy from your the different Bronco vendors will not only help your steering by getting rid of slop play. Ect, but it also will help with bumpster. As it will make the drag link longer and help match that angle to your track bar to help with bump steering issues.

Stock.boxes are expensive, not very strong and you might still have to rebuild it. Or if you bought one of the bronco specific boxes for a street cruiser, it would be a great upgrade.

There is also a great easy to install steering frame upgrade kit. Because the frame is very prone to cracking or the stockbox bolts on. And yet, i've also seen them crack, where the F 100 box mts also.
Then, you can get rid of that (ugly) shock absorber mounted from the frame down to your steering as you won't need it anymore
 
Last edited:

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,112
That was one of the first conversion kits on the market. Late 80s to late 90s. 2WD dentside steering box.
Strong box, but the inside the frame mounting makes for a short drag link. Limits articulation. But when this was common, articulation just didn't exist. This is the days of rock hard springs, multiple shocks, bright neon colors. Multiple shops sold it. Game changer when factory power steering boxes were getting rare and expensive.

Looks like the track bar drop bracket is only bolted on. Two things there. One is the bracket tends to move in the bolt holes, gets you a loos front end. Another is the drop bracket adds leverage and the extra load tends to crack the frame. Keep an eye out for those.
 

Brush Hog

Full Member
Joined
Mar 16, 2022
Messages
241
Loc.
NorCal
And check your radiator. Mine had that steering box when I bought it and discovered the PO had made room by hammering in the bottom corner of the radiator. Needless to say it failed one day while on the road.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
Luckily it appears the bracket isn't welded onto the face where the box mounts on the outside of the frame so the bracket removal will just involve cutting welds on the underside of the frame. Many different options now for a box that mounts on the outside of the frame in the stock location.

Todd Z.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
And check your radiator. Mine had that steering box when I bought it and discovered the PO had made room by hammering in the bottom corner of the radiator. Needless to say it failed one day while on the road.

Yeah, that was always one of the downsides of that conversion. I cringed knowing the tank had been bashed at that point too.

Todd Z.
 
OP
OP
J

jdavisjr

Contributor
New Member
Joined
Nov 11, 2025
Messages
35
F-100 box for PS was definitely an upgrade back in 1975 but not anymore. :)

Putting a new steering box in, whether it's a stock Bronco one or one of the aftermarket ones - that you can buy from your the different Bronco vendors will not only help your steering by getting rid of slop play. Ect, but it also will help with bumpster. As it will make the drag link longer and help match that angle to your track bar to help with bump steering issues.

Stock.boxes are expensive, not very strong and you might still have to rebuild it. Or if you bought one of the bronco specific boxes for a street cruiser, it would be a great upgrade.

There is also a great easy to install steering frame upgrade kit. Because the frame is very prone to cracking or the stockbox bolts on. And yet, i've also seen them crack, where the F 100 box mts also.
Then, you can get rid of that (ugly) shock absorber mounted from the frame down to your steering as you won't need it anymore
I defiantly want to get rid of the shock absorber. Any Suggestions on what brand on the steering box?
 
Top