Yes, any shop that has a standard rack that can handle most vehicles, can handle and get a reading on a Bronco.
Most of them won't know how to "adjust" anything other than the toe-in, but that's not a big thing. For that, you can find a specialty shop.
And while you're there, you might as well let them adjust the toe-in anyway. You can then use it as a starting point for all the rest of your messing around with alignment.
A key here is to either get a printout, or a full screen-shot of the readings while it's on the rack. That way you have your reference material.
For most EB's, putting the 7 degree bushings with up to a 3.5" lift do not cause any real issues. For most of us...
You will likely feel a vibration in 4-high, but it can be used in 4-low without issue.
I say "in most cases" because there are always exceptions. Many members here had no major pinion angle issues, while others had enough binding to warrant other changes.
So if you don't get a full check first, there's still a good chance that the 7's will be fine.
Paul