Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
First time I’ve built a read end. Standard 9 inch going to 4.56 gears. This is the pattern I got. From what I can find reading, it looks like it might be ok, but I’d sure like to hear another opinion.
The pattern itself is good.
looks like your dive side is a little close to the toe of the tooth, might bring your pinion in just a hair to try and center it up.
On the otherhand, I have had much worse patterns and run them with no issues.
looks good. Backlash is snug so pattern is towards the toe but some would call that ideal.....once things load up that pattern will move up the tooth and should be perfect. You will be happy with that setup. Once things break in, wear in, and loosen up you will not be dissapointed.