That may have been mine. I used one of the ABS plastic replacement glove box from the vendors, and simply trimmed it to fit where the cage tube passes through the side of it.
Yours looks good so far. Looks about like mine where it passes through on the passenger side.
Thanks Dusty. It was yours, xcntrk, and firehawk's that I was referencing in keeping the glove box in factory location. I did not want to cut into the glovebox corner on the dash face. What is going on behind the glovebox door was less of a concern to me. With how tight all the fitting had to be made to accomplish this, I'm hoping for no squeaks and rattles to chase down.
One other thing I found during the dash in and out process was that the dash is shifted to the passenger side about 3/8"-1/2"...or it is on my 69, possibly due to 1969 build QC standards? With the dash in place, there is a larger gap on the drivers side between the top of the inner kick panel and the dash than on the passenger side.