That Scout top looks like it'll flap like crazy in a stiff breeze. Maybe it's not tightened down in that first pic?I hope the EB top will not have a rake like the Scout pic. The higher rear bow looks bad to me. I hope they have a Rampage top to reference. I like the Rampage look just not the tinted windows and poor quality complaints out there.
I sent an email requesting information on development of a Soft Topper for an Early Bronco.![]()
I hope the EB top will not have a rake like the Scout pic. The higher rear bow looks bad to me. I hope they have a Rampage top to reference. I like the Rampage look just not the tinted windows and poor quality complaints out there.
That Scout top looks like it'll flap like crazy in a stiff breeze. Maybe it's not tightened down in that first pic?
Sent from my SM-N975U using Tapatalk
Thanks for the reply and your commitment. We actually may get a good top. We have to gather all of our comments into a list (if not done already) so we can can get this soft top designed correctly.
Another thought >> See if they can make without the side snaps. I have a Kayline on my 69EB with the “no-snaps” design. It’s a plastic channel that tucks into an aluminum channel. Not sure of the Rampage carried this over. This makes putting the top up faster and with no chance of the snaps failing. If good, I plan to buy a white top with clear zip-out windows from Softtopper for my 71EB project.
For me -
Gotta be white, off white or wimbledon (or orange ;D).
Clear windows.
Minimal fiddly.
For me -
Gotta be white, off white or wimbledon (or orange ;D).
Clear windows.
Minimal fiddly.
I'm with Lawndart on this, well maybe not the orange
Both my old Kayline and STC tops have the channel instead of snaps. Definitely prefer that vs snaps
Sorry but using my phone these days and not doing much websites so I haven’t gone to Softtopper’s website.
Do you know how the Softopper Scout windshield gets attached? I‘m pretty sure I mentioned the Kayline/Rampage top has the one piece channel that is preferred. Wondering how Sotopper does it.
Hey hey hey, got the email also.
Hey hey hey, got the email also.
Very nice! Time is flying, we will be working on this before we know it.
Agreed. Low as possible with clearance for the EB factory electric wiper mechanism and a roll cage. We may want to get some feeback on roll cage heights. I will measure my Finished 69EB and my 71EB project and get back to you with the roll bar heights. These are San Felipe styles. It’s best to measure from the top of the quarter panels to the roll bar top. This will a avoid any differences in floor coverings. EB’s with family cages may have to chime in.
Nicely done..![]()
For the bump >>
I measured my 71EB San Felipe bar I bought from WH. It measures 23 5/8” from the top of the bed rail to the roll bar top (at center of cage). I’ll measure my finished 69EB soon. It’s the same style bar but I think a Smitty Built from many moons ago.






