• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Spacer between MC an Hydroboost

kaw550

Bronco Guru
Joined
Jul 4, 2007
Messages
1,136
I have an Astroboost setup that I have had in for a few years. I use the flat bracket but had to add shims to get it to clear the valve cover and the column. I want to get rid of the shims and mount it flush with the firewall.

I think I am going to have to clock it 90 degrees. In order to do so, I will need an adapter between the Astro van MC and the hydroboost. I planned on buying one but I am thinking that I may just make one out of some scrap.

If I add the spacer, do I need to lengthen anything inside the hydroboost?
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
Yes, you'll need to lengthen the pushrod coming out the same amount as the thickness of the spacer, if I'm understanding your question correctly.

Todd Z.
 
OP
OP
kaw550

kaw550

Bronco Guru
Joined
Jul 4, 2007
Messages
1,136
Do I lengthen the pushrod that connects to the brake pedal or is there one between tbe MC and the hydroboost?
 

DanHall

Full Member
Joined
Feb 18, 2013
Messages
234
Loc.
Pueblo, CO
Input rod attaches to the pedal and the output rod engages the MC. Two separate rods. The output rod will need to be lengthened to accomodate the spacer.
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
When I put my hydroboost in I measured the depth difference between the master that came off the HB and the one I was going to use. Then I made the clocking ring that thickness, .270".
 

zerostar2410

Sr. Member
Joined
May 19, 2009
Messages
612
where can i get one of these clocking rings? im doing the same exact thing but dont really want to fab something up.

What does a clocking ring look like?
 

Viperwolf1

Contributor
electron whisperer
Joined
Aug 23, 2007
Messages
24,451
where can i get one of these clocking rings? im doing the same exact thing but dont really want to fab something up.

What does a clocking ring look like?

I fabbed mine but have seen them for sale somewhere.
 

englewoodcowboy

Lick Creek Restorations
Joined
Jul 25, 2010
Messages
4,201
I am going to use the Ford firewall adapter (4 bolt) that they (Talon Hydraulics) make as it will catch the top two bolts like the offset power boost bracket does and the two bolts that the stock MC bolts too as well as a clocking ring from them. I am a ways off from doing this part of my build but I will chime in with pics etc to show how it goes in the months ahead.
 

Hozr

Bronco Guru
Joined
Oct 15, 2011
Messages
1,439
Loc.
Rogue Valley, OR
I have a tallon hydraulics adapter for sale!

It's used but it's in good shape. Went with the angle adapter to clear instead.

$30 shipped PM if interested.
 
Top