All an impact is is a hammer beating against a ratchet so if you don't have a HF close by or don't wanna spend money pull out the ratchet and put the screwdriver bit needed on it with the attachment and take your hammer and tap repeatedly the end of the ratchet or put a bar over the ratchet and give yourself more leverage and bust it loose. Impact is always a very nice option but if you don't have the tool already who wants to go drive 20 miles or more or over pay for the tool.
Sort of . . . it creates rotational torque. What you just described is a good way to ruin a ratchet.
I've had great luck with one of these plus BFH
http://www.harborfreight.com/impact-screwdriver-set-with-case-37530.html
Tim
that is what I used to get mine out, but I bought mine at Napa. I think it was like $12.






