• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Thoughts on going Coyote?

Scubadds

Jr. Member
Joined
Jan 9, 2017
Messages
54
I am at the stage where I need to decide a few things.
One of which that keeps coming up, is going Coyote.
My '77 is frame off now, I don't have radiator, fuel tank, A/C or serpentine kit and I already have 4.8 gears in and the body lift....
I looked thru the BC bronco Coyote kit, and realized that a good bit of the kit I would need anyway....It would add a large amount of cost to my build, but it would be not be the full cost of the kit.

I would for sure have to "scrape up the funds"; but I am thinking long term of the enjoyment

What do you guys think of the idea of going coyote; maybe I have watched 36 Icon videos in a row and have blinders on...
I don't want to have regrets of overspending on a 3rd car, nor do I want to look back and regret not going slower and doing something that would make the car more fun, more drivable, dependable and possibly much more valuable down the road.... I haven't been in the Bronco game long enough to get a feel for what is desirable now and what may be desirable in the future....there might be a case to keep my original low mile 302 in (I think I might have 52k original miles)
 

doghows72

Bronco Guru
Joined
Jan 5, 2005
Messages
2,036
If you have the cash hell yes. Otherwise there are a lot of WAY more economical solutions for way less cash and you'll get just as good of performance.
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
Are we talking mustang or truck Coyote? There is a huge difference in how they run. If you can't tell the difference, just stick to the pushrod 302.
 

PaveBronco

Sr. Member
Joined
Oct 30, 2012
Messages
914
Best bang for the Buck would be an Explorer set up, but it depends on what you're going to do with your Bronco...street, mud, rocks.....light off road..
 

904Bronco

Contributor
Bronco Guru
Joined
Sep 28, 2004
Messages
6,720
Loc.
San Martin, CA
If you have the cash hell yes. Otherwise there are a lot of WAY more economical solutions for way less cash and you'll get just as good of performance.

I am not a hater of Coyote swap, My buddy is doing it.
He has invested a fair amount of $$$ in the Crate motor, Tranny, Atlas, Drivelines, Axles/diff's, adapters, suspension, etc.

It is not going to be cheap.
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,124
Loc.
Cuchara, CO
BC Broncos has done an EcoBoost. Not sure if the "kit" is out yet. Not sure about the 10 speed tranny thought - that just sound overkill!
 

tabascom16

Sr. Member
Joined
Oct 12, 2003
Messages
527
Loc.
Salisbury, PA
You can find the F150 Coyote motors much cheaper. My friend who is into cars finds them all the time for around $2500-$3000. Add about $1500 for the independent wiring harness and you are set. Doing a decent rebuild and upgrade on an old school 302 or 351 with heads is going to run you that and more.

You can also find the mustang cams for dirt cheap if you use Search Tempest to scan craigslist. There are mustang guys out there putting upgraded cams in their engines. After the mustang cam swap, about the only internal difference is about half a compression point less.

The one thing with the modern engines is the computer control and variable cam timing. The variable cam timing does so much for torque it is ridiculous. I saw an article where at something like 2500 rpm the variable cam timing was good for an addition 120ft-lbs torque vs leaving the cams at static timing. And added 10s of horsepower in the higher rpm ranges.

If I already didn't put a good amount of money on a total 408W stroker 11 years ago, when I did my frame of resto I would have gone Coyote.
 
Last edited:

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
Explorer serp on a built 351W - cheaper and more powerful and will easily bolt in.
 

Skiddy

Bronco Guru
Joined
Oct 8, 2003
Messages
11,587
on they coyote engine, what is it that make it a desired swap. more torque than a 351 at low rpm? high hp? they look cool is all I know. I think I need to drive something with one in it;D
 

67686977

Sr. Member
Joined
Jun 19, 2002
Messages
480
Loc.
Liberal\Claremore
Wait a couple of years. First there was the mustang swap, then the explorer swap, and now the coyote. Put 351 in and wait to see what the next craze is.
 

broncnaz

Bronco Guru
Joined
May 22, 2003
Messages
24,342
I think most people swap them because of the HP numbers and to be different.. Yes properly setup it can be a good setup. But for me the added complication of the engine ie, variable valve timing, cam phasers ect. and electronics plus the size of the thing. is not worth it.
Most of the charts Ive seen on power numbers for these engine show no big gain in the lowend power over a standard old school small block. But they do shine on the top end. So if you like to drive fast then it may be the ticket.
 

5001craig

Contributor
Bronco Guru
Joined
Nov 3, 2013
Messages
1,180
If you like to hear it sing I'd look at the new 5.2 180° crank motor. That would be something...

526 hp, 429 lb ft.

2016-Ford-Mustang-Shelby-GT350-GT350R-130-876x535.jpg









But would it fit?
 

warthog6x6

Jr. Member
Joined
Jun 5, 2016
Messages
88
Loc.
Decatur, Texas
I'm close to the same point in my restore as you are and I am struggling with the very same question. I live in Texas and was at BC Broncos last week picking up my Dana 44 and Ford 9 inch rear that they just rebuilt for me and I got to spend over an hour with Jason looking at the broncos they are restoring and talking about engine selection. He is very high on the coyote. He believes that "now" you can install the coyote and all the trimmings for "close" to similar dollars spent for a crate motor with serpentine. I had trouble believing this but he was very direct and held fast to his position. He also pointed out that if you install a coyote you are getting a NEW engine and NOT a rebuilt motor. I won't detail his discussion and experience with using rebuilt crate motors but it was eye opening. He also mentioned that BC is working on a package called "coyote in a week" where if you bring your rolling chassis in they will install it for you in ONE week. Seems impossible to me but that was his position. Package not ready yet but soon. So,,,I am now leaning toward a coyote for reliability, additional resale value, and modernization plus taking advantage of the "in a week" package. Jason is hard to get on the phone but he/they will answer an email if you give them some time -- he is very busy. BTW he is also one brilliant technician. My head was swimming after our discussion!
 

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,362
as far as rebuilds go, i have a local machine shop, and we have no issues with rebuilds and they are reasonable, but i am not trying to build hot rod motors, just something with good reliability and decent numbers. Personally, i think the old motors will continue to be popular in the broncos, maybe you have been watching too much icon stuff. I think your answer lies in the fact that you will have to scrape up the money, be interested to know where you scrape lol. I once had all these ideas of upgrades, my bronco now waits patiently on me to get back to work on her. In her old glory, she was a fine machine with a carb and a C4. Nothing wrong with the upgrades, nothing wrong with the old stuff. The new stuff just brings up logistical problems that delay the build and increase cost. If you offered me an icon or elite with a coyote or lubr all original, i would take the latter. jmho.
 
Top