• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Trailering Multiple Broncos..question

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,536
Loc.
NW OK
For those of you trailering two or more, what's you're towing truck...........I'll be in the market soon. My 13' F250 6.2l gas/CNG is awesome, but not when hauling two broncos on a 36' lowboy. Planning on sticking with Ford, but figured I'd test the waters here first.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Call Gordon too, he's hauled up to 3 at a time, haha.

Levi hauls 2. F350 Diesel
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
Ecoboost's can tow 11-12k lbs. Not enough?

2 bronco's and 36' trailer is pushing 16-18K so no not even close.%)

I use a 2014 Ram 3500 dually mega cab 4x4, diesel, Aisin 6sp auto (there are 2 auto options) with 4.10 gears (which require the Aisin and dually to get). Factory rates it at 29k trailer weight rating in that trim. Its absolutely an animal with a trailer. My Goose with the camper, bronco, parts, firewood and tools is right at 17k pulls like its not even there. It way out pulls our 2008 megacab that was deleted and turned way up, on paper it made significantly more power but it would not hang with the current truck in the mountains, especially the back roads that I like to drive. Truck just doesn't feel like its working. I've owned 6 of these trucks since 1997, this is far and away my favorite.

I looked really hard at the other 2 options when I bought this truck and I thought they were all nice but I felt myself missing the exhaust brake that works like a jake on a real truck, enough so that I felt like they were 3/4 of the way there on the drivetrain. I also felt the front seats were all about equal but traveling with buddies, there's no equal to riding in the back seat of a mega cab vs Ford and GM crew cabs, there is just no comparison.

I REALLY like my truck. I've got good friends with both of the other 2 and I've spent a good amount of time in them and they seem to be great trucks but the Ram has an edge that the others are missing, they have a drive train that works and feels like a late model class 8 truck (which I like) and still feel like a truck that I can control and make it function like I want and at times need to and I just don't feel the other 2 makers allow for that.
 

ScanmanSteven

Bronco Guru
Joined
Dec 19, 2010
Messages
1,129
No way would I want to pull a trailer long enough for 2 Broncos with a F150 ecoboost. Even if they come in F250 I wouldn't. Like Yeller said you need a truck that can also control that much weight. Doesn't have to be a Dodge, the V10 Ford could do it, just tape over the fuel gauge and stop every 100 miles!
 

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
No way would I want to pull a trailer long enough for 2 Broncos with a F150 ecoboost. Even if they come in F250 I wouldn't. Like Yeller said you need a truck that can also control that much weight. Doesn't have to be a Dodge, the V10 Ford could do it, just tape over the fuel gauge and stop every 100 miles!
The problem is payload. Ecoboost is a fine pulling motor but the puny suspension of the F150 doesn't have enough payload to handle big trailer pin/tongue weights.
 
OP
OP
okie4570

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,536
Loc.
NW OK
The Ecoboost isn't enough truck, and isn't even a consideration. Yeller, is the Aisin something you ordered or is it commonly found on the lot?
 

okorangebrnco

Bronco Guru
Joined
Nov 25, 2004
Messages
1,669
My 2008 F250 Super Duty pulls my 2 Broncos with no problem! The 6.4 Power Stroke may have a horrible reputation, but I have yet to have any crazy issues and since it is paid off, I have no intentions of getting a new one anytime soon.
 

kb6677

Contributor
Bronco Guru
Joined
Jan 19, 2004
Messages
2,178
We started towing double in '07- 32' tilt gooseneck with two rigs from NC to Moab. '07 F350 crew cab dually 4x4. This truck did not stay around long-it was a replacement for an '06 with a 6.0 which had some issues. I gave in to peer pressure and bought one of the last '07 5.9 Goats 3500 crew cab duallys, 4x4. Spent the $$ to have the auto built with 2000 miles on the truck(could not find a 6speed that late in the year in the color I wanted) and towed double with it all over the country for 4 years. Engine had mods as well, it was a great rig except for the ride and smallish rear seat. Bought an '11 F350 dually crew cab 4x4 with the 6.7 in October of 10. Loved the truck. We stopped hauling friends in '12 when most had finally gotten their own tow rigs. So, we now have a F350 crew cab long bed 4x4 srw truck with the 6.7. We have towed double a few times and it does fine- not a dually but does well. Love the mpg- 19.2-20 empty just the truck.
So, question for okie- how many times a year are you going to tow double and how far? Reason- if you are going to mainly drive it and not tow double much, I would rec. going with a srw-see mpg above. If you plan to tow double alot, then no substitute for a dually. Crew cab long bed is your friend-longer wheelbase is good :)
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
Depends on the dealer some yes some no, it does cost more and only available in 3500's (both SRW and DRW) having run the 68RE it's a good unit but the torque rating on the Aisin is significantly higher (and the engines are more as well, 900ftlb for 2016) and it has some attributes that are smoother in function like down shifting under heavy load.

KB - I had a 2500 twin to your 07 5.9 truck until the end of 2013 at the same time my wife drove an 08 megacab that we sold at the end of 2013 as well
 
OP
OP
okie4570

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,536
Loc.
NW OK
Thanks for the input. I'll only tow like this half a dozen times a year at most, so I really don't feel like I can justify a dually, as I simply drive a lot miles through out the year not towing. I'm a 1000 miles from Super Celebration, 900 miles from Moab, and 500 miles from Katemcy, Tx. :)
 

FlogginHarvey

Sr. Member
Joined
Jul 3, 2011
Messages
373
Loc.
Wichita
Not towing Broncos (unfortunately). We are a farm equipment distributor in Kansas towing product around in seven states and put 30,000 to 60,000 miles on per year towing. We tow 32' gooseneck and our GVWR with truck, trailer, and load typically averages 23,000 to 25,000 (11,500 on trucks and 14,000 for trailers by the plaques). We largely run Fords.

We went from our dually F350's to single rear 4x4 5 years ago and won't go back for how we use them. Myself and our guys really like them. We just bought our second small "fleet" of 2016 F350 4x4 6.7. The four doors helps with cab space but the extra wheelbase length and weight makes a big difference in windy and generally less than great weather and road conditions. Going up grades in traffic keeping pace is huge with the diesel as is our general need to get 250,000-300,000 life out of each truck package and loaded, long term fuel economy makes an impact.

We also have a 2014 GMC 3500 4x4 duramax as another fleet vehicle. GMC makes a nice truck and they tow well on the blacktop but don't seem to hold up as well if off highway. I pulled with it last week and the difference in power was noticeable. I'm not trying to beat the truck up, just noticed a seat-of-the-pants difference and the rest of the team said the same thing.

On a side note, there is a seat-of-the-pants power power difference going from a stock 2011-2014 6.7 to the stock 2016 6.7. I called BS to our team but I drive a 2012 and the rest of our team is in 2016's. I swapped trucks with a guy towing a load for a day and I had to buy him beer that night to pay off my bet...;). We all won!;)

Stay away from the 6.0 unless it has had some basic and necessary mods done.

Stay away from the 6.4 all together - we replaced TWO of them in two different trucks inside of 115,000 miles on each.

The 2011-2012 years are prone to need radiator replacements. Your might check if this has been completed if looking used. Two of ours needed them prior to 100,000 mark.

Two of our 2012 had death wobble at around 65,000-70,000 miles and the guys had replacement track bars installed and as long as we stayed on top of the tire wear/replacement we didn't have an issue after the replacement parts were installed (one truck at 185,000 and another at 169,000). We absolutely got away from the standard Michellin tires and went to both the Toyo open country at2 and Cooper Dueler. We average 50,000 out of each set now with proper rotations and inflation. Not bad considering our DAILY average GVWR noted above.

It's a long answer but We spend a lot of miles in the seat of our trucks...not the only answer, just our experience. good luck with your search
 
Last edited:
OP
OP
okie4570

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,536
Loc.
NW OK
Good stuff and like the real world experiences, thanks again for the input. I've put 300k+ on a 7.3l psd and 333k+ on a 03' 6.0l psd..........while they both served me well, they're no comparison to the 6.7' PSD from the little I've towed with one. The Dodge setup like Yellers would really be my only other option.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
The race team I work with has always run single wheel trucks, partly because the loads were not that heavy (under 10k trailer normally) and it made the truck more versatile for using it as a pit support vehicle, it just fits better in tight places and performs better off road. They just sold their 2011 Ram and ordered a 2016 identical to mine except single wheel and has either 3.42 or 3.73 gears, I don't remember off hand which, but I'll know in a few weeks when it arrives and I'm doing what little upfit it needs to do its job.

On a side note this is the 1st dually I've had since 2003, the single wheel trucks did a fine job other than I had problems going through rear tires due to over loading (not terrible but always on the borderline) them so I would have to put rears on 1 or 2 times a year because they wouldn't balance. Since then tire designs have stepped up and the weight ratings are up. The new Ram 3500 SRW has a rear axle weight of 7000 and the tires are rated to 7800, enough that even with heavy pin weight I could run a single wheel truck again, my current set up is 7200# on the rear axle without the bronco on the back, its 6200 with it. So my next truck may be a single wheel, we will see in a couple of years how I'm feeling and what options are available. I know I miss wheelin my tow rig and getting asked how I got there....LOL
 

Broncobowsher

Contributor
Total hack
Joined
Jun 4, 2002
Messages
37,114
At work we have an F450 with a 3-car hauler that has a couple hundred thousand miles on it. Bought new in about '04. The only time the hauler comes off is when the truck needs to go in for a service. Remarkably trouble free, especially for a 6.0 powerstroke.

The catch is you need a CDL to drive it legally. Add the GVW of the truck and the GVW of the trailer and if they add up to 26k or more, you need a CDL. GVW is just the rated capacity, not what you are loaded to.
A 1-ton single rear wheel typically has a GVW of 9900 which would let you tow up to a 16k trailer and be under the 26k rating for commercial. Step up to a dually with a 12k rating with a 16k rated trailer (which would be a safer to rig) but that pushes you into needing a CDL to be legal.

We were doing this wrong for years and got lucky. Had one guy get pulled over, inspected, and nicely pointed out that using the published GCVW didn't matter. Huge amount of manpower went into finding what the laws really are, invited DOT to come to the office and explain it. GVW rating of the tow vehicle + GVW of the trailer > 26k = CDL. Health card needed if over 16k in state, 10k across state lines, Log book needed if more than (I forget the exact distance, 250 miles?) from the location listed with the DOT number we have for vehicles out of our office.

Put simply, don't go too big or you may be in for more then you expected.
 

ScanmanSteven

Bronco Guru
Joined
Dec 19, 2010
Messages
1,129
Broncobowsher, the rules are different for indiviuals vs commercial business. Not that it should be but it is. CDL = commercial drivers license. A good example are RVs. Many motorhomes easily reach the 26,000#s but aren't required to have a cdl. A couple of years ago in MO, we were hauling loads of dirt with our Dodge dually and gooseneck licensed at 24,000#. We were regularly scaling at 28,000#. I called our local scale we had to pass to see how bad a fine it would be getting caught. They said as long as the dirt was for personal use that the door post ratings and even license rating didn't matter, didn't even want me in the scales. He said if we did get stopped that tire capacity was what they check not GVWR or license plate rating because it was for personal use. Just another view.

Okie, if I was you I would just use your PSD, just making sure maintenance was up to date. Sure it's not going to be the fastest but is capable of doing those trips because they're once or twice a year ventures. Most critical is tires, keep those kids safe which I know you do, good luck.
 

Yeller

Contributor
Bronco Guru
Joined
Mar 27, 2012
Messages
7,692
Loc.
Rogers County Oklahoma
Broncobowsher, the rules are different for indiviuals vs commercial business.

this is 100% correct. I see a LOT of debate about this, and some states vary (CA and NY come to mind....) as long as your legal at home and not commercial your legal every where. I used to run into this with my 1st DRW truck, it was a cab and chassis with a flat bed so it was considered a commercial truck even though it was not licenced or used in that manner and occasionally i would have to prove it, I still keep a copy of the hand book with the page paper clipped and the exception title highlighted, it makes for interesting conversation, but I have not had to use it since I sold that truck 12 years ago. Occasionally you'll be in another state that your not compliant by their rules (same goes for your wheelin rig) and because of that they will give you a hard time, they forget you are federally protected and sometimes need to be reminded of that. My truck CGVW is 37,500# even though I have a CDL I don't need it, and my junk weighed 26,740# last time I weighed it on my way to TN last month.
 

englewoodcowboy

Lick Creek Restorations
Joined
Jul 25, 2010
Messages
4,201
Ive pulled 2 several times with my 02 F250 7.3 and it does well. No need for going gonzo with a tow rig but a diesel is very beneficial and as others have stated, I would not want to pull 2 behind an F150 just due to the weight ratio. An F250 diesel and F350 are within ounces of each other in SRW, duallies are the best for towing if you plan to do it a lot but for around town daily driving they suck. You have lots to think about to make a good decision for you. Its like this, I would not own just a Bronco for a family vehicle due to its limitations in size etc and that goes the same for a dually truck. If I was buying a vehicle for towing and thats the only time I would be using it, it would hands down be a dually but my truck is my DD and it gets used for that more than anything else.
 

kb6677

Contributor
Bronco Guru
Joined
Jan 19, 2004
Messages
2,178
this is 100% correct. I see a LOT of debate about this, and some states vary (CA and NY come to mind....) as long as your legal at home and not commercial your legal every where. I used to run into this with my 1st DRW truck, it was a cab and chassis with a flat bed so it was considered a commercial truck even though it was not licenced or used in that manner and occasionally i would have to prove it, I still keep a copy of the hand book with the page paper clipped and the exception title highlighted, it makes for interesting conversation, but I have not had to use it since I sold that truck 12 years ago. Occasionally you'll be in another state that your not compliant by their rules (same goes for your wheelin rig) and because of that they will give you a hard time, they forget you are federally protected and sometimes need to be reminded of that. My truck CGVW is 37,500# even though I have a CDL I don't need it, and my junk weighed 26,740# last time I weighed it on my way to TN last month.

x2- we would always go across the scales at a truck stop in TN (or NC-easier access in east TN) when we headed to Moab pulling two rigs. There was always a conversation about "how much do you think we weigh with all this crap and two rigs?" Most I weighed was 22900 with the Goat pulling 2 truggies, two couple's gear for a week and a mobile shop. I kept the weight printout incase we got hit with "run across these portable scales".

I also have a class A CDL, so the license was not a big deal, BUT, in NC WEIGHTED TAGS are big!! They will write you a ticket in a heartbeat if you exceed what you are tagged for on your registration.

I have never been checked pulling a single rig behind a dually or my srw trucks, but was pulled in AR in 2010 for a weight check. I showed him my Class A DL and the weight printout from TN earlier that morning- the officer did not even ask for my reg. to see what I was tagged at. He liked the rigs and said have a safe trip.
 
Top