• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

UPDATE on caster alignment

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
...None of this is a burden to me. I take it as a learning of how to make things work and is how I enjoy my time off work and a way to spend my money when not working.

Fantastic attitude! Great to hear. That's what it's all about.

Paul
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Something else I noticed and wanted to mention is the coil springs bulked forward right off the top of the perch then angle back toward top at the spring bucket. I'm thinking because the caster is not enough and the axle housing is rotated forward.

Unfortunately for what we're talking about here, the spring bow is completely a result of the angle of the radius arm pad and lower spring bucket.
Only ways I can think of off the top of my head to correct that are:
1. Lower the rear of the arms with drop brackets.
2. Add a tapered shim under the bucket.
3. Use one of the longer radius arms.
4. Make custom radius arms
5. Lower the truck back down.

Just rotating the axle housing in any way that does not effect the spring bucket angle will not (normally) change the bow. Maybe minimally, but not effectively.


Maybe in those last two pics you can see the little rotation in that saddle.

Yeah baby! That's some rotation for sure!
I was going to say, just by your pictures, it looks like some of that could be removed by finding the neutral angle of the joints, the "middle" angle of the linkage (if there is such a thing) between the rotation, and angle the saddle farther forward to make the angle of the draglink less in fore-n-aft plane.

Worth a try anyway, just to see if it at least reduces the flip-flop. Might not be able to get rid of it that way, but it should help a little at least.
There is probably something you can do to the tie-rod ends too, that could limit their rotational movement. They do not need to flop over at all in a solid axle environment. They only need to be able to let the inner ball pivot inside the socket and around the bolt. If you could find some kind of a washer that was large enough to cover the rod end, domed enough to limit the amount of freedom, but not touch enough to hinder the pivoting movement, that might be a trick to try too.

Sounds like another product for a fab shop or rod end supply company to develop.
Of course, they'd prefer to have the geometry perfect so you don't need to do that, but on EB's you can't always have that cake and eat it too, in simple bolt-on circumstances.

Give the angle change a bit of a try though, and see what you get.

Paul
 

Lmfp

Bronco Guru
Joined
Jun 28, 2011
Messages
1,496
Loc.
Lake Charles, LA
I have the same tro setup as you and have noticed tge sattle movement. Would it hurt to turn the rod ends on the knuckles opposite of each other to stop the rotation?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Now that I bother to open my eyes Casey, obviously you have Duff radius arms too. So is there any available caster adjustment in them? If so, then THAT method would indeed help the spring bow.
It would not help your pinion angle, and it would not likely be enough to help you out of your overall caster dilemma, but if it rotates the actual ends and caps of the arm, then it would help the spring bow.

Paul
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
...Would it hurt to turn the rod ends on the knuckles opposite of each other to stop the rotation?

While it's generally not a good idea to do that, because if a rod end is already at it's travel limit and is then forced to go farther, it could fail catastrophically.
But since this is a tie-rod and not a draglink, or suspension linkage, I'm not sure there would be any circumstances that this would happen.
About the only thing I can think of is if the draglink ever becomes the limiting factor, it could pull the tie-rod in one direction that tries to force the rod-end over it's limit.

But in lieu of that, I can't see where it would hurt to at least experiment with it. Good idea in fact, as it would certainly resist the movement you don't want.
I wonder though, if in that resistance, if there's enough force imparted from the steering system into the tie-rod, it could still fail a joint?
In my mind, that puts it in the questionable practice category so probably not a good idea to run it that way for long. As an experiment to see if that helps how it feels on the road? You bet. But as a permanent fix? Not as happy with that scenario.

But I'm not an expert on such things. Maybe someone who's designed and run more setups like this would chime in and give their 3 cents on it.

Good topic though. I'm interested in hearing what others say about it.

Paul
 

Lmfp

Bronco Guru
Joined
Jun 28, 2011
Messages
1,496
Loc.
Lake Charles, LA
It just seems to me like all the stress in that scenario is on the left and right side of the joint. If it rolls forward or backwards its going to end up with the same stress anyways? Im deffinately not an expert on the subject but it just seems one way or another that forward to back stress is gonna be there. I wonder if chevy 1ton rod ends could be put in place and keep the heims on the drag link?
 

Lmfp

Bronco Guru
Joined
Jun 28, 2011
Messages
1,496
Loc.
Lake Charles, LA
I guess I should add mine is scary as $hit at speed. I just added a steering stabilizer to help but I know thats just a band aid. Guess ill find out when my trans is back from rebuild.
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
You're right about the stress, but my concern is with where it stops. If when adjusted normally it's stopping because it's being limited by the rod end, BUT it would not have been forced much farther anyway, then realigning the rod ends to be in a bind to keep it from rotating in the first place would probably not pose any issue.
BUT, if the rotation movement is limited from the get-go, and there is more distance that they're trying to be pushed, then what's the outer limit for them? I don't know. I'm just being paranoid and over-protective.

But I don't break things that way either!!! ;)
So I don't know. And still feel it's totally with experimenting with initially.

And yes, a standard tie-rod end like the GM ones, would work fine in combination with the SRE's on the draglink. I think some have done it already if I'm not mistaken. Not sure who though.
And a good new TRE like the GM type is naturally stiffer in a rotational way anyway. So if the pressure imparted by the draglink is minimal, it won't even rotate them no matter what the angle of the mounting pad. But after they wear in and get looser, even they would rotate too. Lots of front ends using standard TRE's get plenty of rotation action too. See it all the time.
Usually due to one or both of either bad geometry or worn out rod-ends.

Paul
 

Lmfp

Bronco Guru
Joined
Jun 28, 2011
Messages
1,496
Loc.
Lake Charles, LA
I might try bending the washers a tad on the rod end to limit movement a bit first and see how that works. Im pretty sure they're big enough to just touch the outer parts of the tre.
 
OP
OP
Casey835

Casey835

Sr. Member
Joined
Mar 8, 2008
Messages
759
I do have a drop pit and track bracket and I'm not afraid to put them on and take a look....might even take a ride!!'
 
OP
OP
Casey835

Casey835

Sr. Member
Joined
Mar 8, 2008
Messages
759
Ok I've got an update on this.....
Made se adjustments to the toe in, it is set at 1/4". Changed air pressure to 26psi. And rechecked centering of frame over front axle, was bout 5/16" off. It has much better road manners now. Oh yeah I also used some rubber/neoprene looking washers with a large washer on top of heimsteering to prevent rotating.
 
OP
OP
Casey835

Casey835

Sr. Member
Joined
Mar 8, 2008
Messages
759
Yes I can get pics later. I can tell you. That the rubber ones and metal ones do not make contact with the ball of the heim. Id is larger. I also plan on finding something better suited for this that will prevent any binding if it should occur. I don't like the fact that the washer that is supposed to be there does not or appears not to be seated on flat top portion of the ball in which the stud goes through. There is no visible rotation or foul movement at this point.
 

blazinchuck

Bronco Guru
Joined
Jul 14, 2005
Messages
3,319
casey, as for the saddle rotating...i had the same issue with the bc steering set up and other hiem TRO's on FBG....just loosen jam nuts and clock each hiem opposite of the other on each( ei. tie rod, and drag link) by doing that...nothing spins or flips over. hth,Chuck
 
OP
OP
Casey835

Casey835

Sr. Member
Joined
Mar 8, 2008
Messages
759
hyqaguje.jpg
edaju4y7.jpg

As far as the rubber washer, I threw the package out, but looks just like washer just not as wide from id- od.
humuvama.jpg
radu3uma.jpg

I'm gonna get rid of that setup though and do what Chuck said.
Btw Chuck hey man what's up?
Thought bout you today!
 

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,761
Casey, you have seen my rig and know I run the same setup. My Duff setup had rear issues not front. She is stable on the road so I am not sure why you are having these issues. You are certain this is not a function of the extreme body roll experienced with the use of the duffs shocks?
 
OP
OP
Casey835

Casey835

Sr. Member
Joined
Mar 8, 2008
Messages
759
Alignment

I have thought about that and do believe that has some to do with it. I actually thought bout send you a pm and ask what those shocks were that you traded out with and said ride was much better. At this point I'm convinced caster is main issue. It does not return to center at all after making a turn.
I also plan to do a currie sway bar setup or similar. I want it as stable as possible.
 

chuzie

Bronco Guru
Joined
Jul 21, 2006
Messages
2,761
M95 shocks. Night and day. Get it stable first. Sway bar is a band-aid that should be added down the road once other issues are corrected
 
Top