Yep, what they said. Adjust at idle, but check the rest, just to be sure it's what you want. The individual advance curve built in (or added) to the distributor's advance mechanism(s) is what takes care of the rest.
What you're doing at idle, is getting the ballpark with the vacuum reading, then tweaking things if needed. If what you did at idle doesn't give you optimum results at other rpm levels and load values, you adjust for best "compromise" readings.
The only way to get the best of all worlds is to modify your advance curve to suit your individual vehicle's needs. That's only done by changing springs, weights, and vacuum range adjustments (the screw that ransil was talking about).
Anything else is just compromise OR luck.
So your thinking is on the right track, but you can't change the actual relationship of one to the other by twisting the distributor. Unfortunately, it's not that simple. Otherwise you'd need to do it at all rpm ranges while driving.
They tried that with things like an MSD Adjustable Timing Control box. Nice, but not optimum either.
All the hot-rod shops back in the day used to have a dizzy machine that they could re-curve your distributor for you to meet your needs. It was never cheap (someone else's time never is), and most speed shops are long gone now and it's all about mail-order and the internet to get the lowest price.
Best thing currently, to make it right at all times, would be the new Mallory electronic distributors that have a digital advance mechanism and a MAP sensor built in. You flip the switch to one of five different advance curves till you find the one you like, OR, you program your own with your PC to suit your needs.
Very 2000. Unlike stock, which is still very '50's!!!!
Paul