Epps1983
New Member
Finally received my vacuum gauge and timing light, I removed and plugged my timed vacuum and plugged in gauge to full manifold at the base of the carb. I was really initially trying to see if there was a vacuum leak but the needle seemed steady. I took a pic of the gauge after it reached operating temp and the needle only had a bout a 1/2 in of movement in it.
Should I have kept the vacuum advance plugged in?
I'm working on doing the timing and adjusting the carb but didn't want to get ahead of myself if there was an issue here that needs solving first.
Cheers,
Shawn
Should I have kept the vacuum advance plugged in?
I'm working on doing the timing and adjusting the carb but didn't want to get ahead of myself if there was an issue here that needs solving first.
Cheers,
Shawn











