What have you done to your Bronco today?

[FordBronc]

Put 5 gals on 91 in it today, because it only gets the good stuff.

 

[tasker]

not much on either....running grounds on one and diagnosing backfire through the carb on the other...

 

[T-Bird]

I was at Vanderbilt all last week and got Juiced up with meds. Feeling pretty good this week so spending time on the roadster. I restored the whole seat with new boards,foam, covers and powder coat. Removed bulk head and mounted spare on tailgate. Now I have room for Boone and the new grandbaby that will be here in October...due same time as SC
Before and after pictures of rear seat, it was pretty rough. Covers and foam were from Bronco Hut. Original armrests were refurbished by Just Dashes.
Used the Tom's Bronco Parts Template to make the marks for drilling.

 

[56f100bbw]

Bought front and rear bumper off a 66 bronco to chop up for custom bumpers for my 1/2 cab

 

[68rustbucket]

Replaced original ps pump w/Saginaw pump and new hoses. Flushed the radiator, replaced upper, lower, and bypass hoses. And replaced the 2 v belts.

 

[Howard2x4x4]

Bought front and rear bumper off a 66 bronco to chop up for custom bumpers for my 1/2 cab

Keep us posted. I'd love to see your idea. Thanks. Howard in beautiful west Michigan

 

[bronkenn]

Nice job on the seat Terry.

 

[56f100bbw]

66 bumpers

The 66 bumpers are almost wasted they are worse in person but I am cuttings end off and butt weld on a set of nice bumpers and the front bumper not as wide custom 56 front bumper took out license plate endent and made front bumper fit front valance it was too much work not doing that again bronco bumpers will be easy

 

[bstamm42]

First post

Installed 2 1/2” lift on the back and pulling off the Dana 44 for rebuild

 

[T-Bird]

Nice job on the seat Terry.

Thanks Ken

 

[diggs00]

Installing rear 2.5 lift and rebuilding drum brakes hopefully rear bearings are good when I check them.

 

[SamD]

Completed a 1 1/2” lift, new rear drum brakes, new Duff Monster Power disk brake conversion, power coat wheels, and new BFG AT KO2 30x9.50x15 tires.

Sent from my iPhone using Tapatalk

 

[Howard2x4x4]

Sam D, tasty, very tasty! Looks so clean and sanitary! Love the rims, caps and tires!

 

[sprdv1]

Awesome looking rig....

Completed a 1 1/2” lift, new rear drum brakes, new Duff Monster Power disk brake conversion, power coat wheels, and new BFG AT KO2 30x9.50x15 tires.

Sent from my iPhone using Tapatalk

 

[txtruk15]

Completed a 1 1/2” lift, new rear drum brakes, new Duff Monster Power disk brake conversion, power coat wheels, and new BFG AT KO2 30x9.50x15 tires.

Sent from my iPhone using Tapatalk

beautiful EB! I think I've seen this one around Flower Mound/Highland Village area...

 

[Howard2x4x4]

I beat my drum, er, actually one of my drums, I mean one of the brake drums on Cyclops, front passenger side. That thing was on there tighter than a ….. well, tighter than a drum. Had to beat and break and chisel to get the darn thing off.

 

[SteveL]

I beat my drum, er, actually one of my drums, I mean one of the brake drums on Cyclops, front passenger side. That thing was on there tighter than a ….. well, tighter than a drum. Had to beat and break and chisel to get the darn thing off.

Release the e-brake. Oops didnt see front brake. I actually drove the 66 today. Tomorrow maybe I take it to the beach

 

[NGABronco]

I beat my drum, er, actually one of my drums, I mean one of the brake drums on Cyclops, front passenger side. That thing was on there tighter than a ….. well, tighter than a drum. Had to beat and break and chisel to get the darn thing off.

Maybe I missing something, but doesn't that drum come off with the hub???%)%)

 

[56f100bbw]

Salt country ?

 

[1971BroncoSport]

Tops in primer

Coming to end of body prep work.