What have you done to your Bronco today?

[AZ69EB]

Put the defroster vent in. Which ment I had to drop the windsheild and remove the dash.

I will not forget it the next time as it is a pain to put it back in after you put your truck back together.

One of those menal notes.%)

 

[zeeman1]

yanked out the engine, then yanked out the engine from my 84 bronco to swap in. Will swap the intake and EFI stuff tonight and hopefully have this thing back on the road tomorrow.

booyeah.

 

[RollTideMach]

letting the acetone sit in the tank for a while to get rid of the varnish and cutting those 4 pesky bolts that are keeping the front clip on the bronco.

 

[blubuckaroo]

Put the cam, crank, pistons into the block. The split rear seal took a while cause I sure don't want a leak there. It'll be a motor tomorrow.

 

[TheBroncoRanch]

Nothing, I am working on everyone elses broncos for the past 8 months;D

 

[73stallion]

installed my new HAM antenna on it the other day. that's about it lately....

trying to figure out how to haul my pit bike on it.

 

[Z Bronco]

Ordered the EFI harness and pulled a couple of parts from the U-Pull-It yard.

 

[56f100bbw]

install L&L long tube headers on my 77 and a aluminum c-4 pan but had to modify the dip stick fill tube a bunch lower part of the headers were right in the way cut out a 1" at the bottom and tig it back together.

 

[22213evl]

had my boy drain the t-case and get ready for the new stereo equip, don't give me a hard time about the stereo equip I've been waiting 3 years for this stuff.;D

 

[sprdv1]

I looked at it......sighed, adjusted the tarp/cover and went back in to he house!

LOL, I know that feeling. %)

 

[DonsBolt]

Took it out of winter storage, it is back home, and back on the road

Bout the best thing you can do for it ;D;D;D

 

[BroncoMark]

Yanked my stock tank in preperation for my new Aero tank. I need to take some time off of work to go pick it up now.

 

[Vintage Steel]

Gassed it up, 12.4 gal. cuttin' it pretty close. Checked the oil (it never needs any). Jump started a Chevy. washed the windows and gave the interior a good wipe down

 

[jray]

Re-connected the carb accelerator pump linkage that came off....then cranked it and drove it to mom's for lunch.

 

[NJB71]

installed my bcb 24 efi tank, tight squeeze, cant wait to fill it up.....

 

[dantheman222]

This weekend we cleaned and reassembled the speedo with a new lens, Rebuilt the wing windows with new glass and seals, installed new window felts, wired in under dash lights, installed an electronic brake controller, installed stainless swing out mirrors, windshield to body seal, lower door seals and generally continued with finally assembly. We are getting there. I envy you guys that get to drive your Broncos ;D

 

[broncomitch]

took my valve body off and took it apart, i found a valve was in the wrong way.
when i took it all apart i laid it all on the table just how it was.

but my 2nd gear works now and can hardly feel it shift at all!!!;D

 

[stingus]

Changed plugs, wires, fuel and air filter, fixed a window knob, and located the source of a small oil leak.

Taking it to get the leak fixed tomorrow.

 

[mango]

Installed gas tank skid plate. Needed longer bolts.

 

[Pedestrian]

Fried my ECM, fortunately I had a spare.