What have you done to your Bronco today?

[Skiddy]

Opened up the D44 diff.

Sent from my iPhone using Tapatalk Pro

Don't see any big metal chunks so that's good

 

[sprdv1]

got my rear moved back an inch, new springs, shocks and bolted on my gas tank skid plate. gas tank better not ever fall out again;D
ordered new rear brake lines, and pinion yoke/flange

Forgetting those Pics hoss...

 

[BGBronco]

Hydraulic lift

 

[ChrisC74]

One step closer to a bit more power under the hood!!!

 

[Skiddy]

Forgetting those Pics hoss...

doh, should of known i'll get some when I get back home

 

[sprdv1]

Hydraulic lift

Outstanding upgrade.........

 

[sprdv1]

doh, should of known i'll get some when I get back home

lol, bout time...

 

[Apache Bronco]

Cleaned and found my transmission tag (RAN) and took photos of it and other tags with my cell phone for reference.

 

[darrell82]

Stripping her down for Locker install, disc brake conversion and chromoly axle upgrade.


Sent from my iPhone using Tapatalk Pro

 

[kat]

^^^^^^Must be front end week. Had a front hub seal leak and decided to replace bearings/race since I had a little slop in the wheel. Turns out the lock nut was completely backed off and metal shavings all over the place. New races wouldn't tighten up...on BOTH sides...so new hubs for me...=(...I keep throwing money at it and sometimes it sticks....

 

[sprdv1]

LOL, the money keeps rolling right...

^^^^^^Must be front end week. Had a front hub seal leak and decided to replace bearings/race since I had a little slop in the wheel. Turns out the lock nut was completely backed off and metal shavings all over the place. New races wouldn't tighten up...on BOTH sides...so new hubs for me...=(...I keep throwing money at it and sometimes it sticks....

 

[kat]

LOL, the money keeps rolling right...

Yeah, looks like I spend all my mad money on this thing......But you can't take it with you

 

[rspd505]

Won’t need carpentry tools now! Productive day, went from this to this.

 

[Howard2x4x4]

Trial fit grill and fenders, bought new shocks.

 

[73AnneBoleyn]

Continuing to cut out rusty floor pans. Nothing exciting. :/

 

[Skiddy]

Forgetting those Pics hoss...

here you go, finished up with the rear. already feels more stable without the lift blocks. of course I had to try out the flex a little;D

 

[deltabronco]

I opened the garage door and looked at it. Now I’m going to bed��

 

[66broncoCT]

Drove it to the last swap meet of the year around here. When I parked this lot was full it started to rain and I got out to see the bronco being a lone wolf haha. Scored a sweet deal on a C4 setup though so I might have a winter project...

 

[JaxLax]

Fixed one issue: changed the exhaust from a rear outlet to side outlets so I can ride with the rear hatch open now!

Attempted to fix another: removed the steering stabilizer, but it didn't cure my turning issues.

Continued cleaning and other little things. Removed some more unused wires. Filled a few holes in the firewall (after removing the wires) so I don't have engine bay air blowing on me as I drive.

 

[Laxdad32]

Not today, but over the weekend. Built a body cart, and pulled the body off the frame, in preparation for a LOT of rust repair. Basically going to be a whole new body.