What have you done to your Bronco today?

[Soylent]

Picked up cage from the powder coater.

 

[399strokerEB]

Started to tear down my spare tcase to rebuild and beef up before my road trip.

 

[Soylent]

Started to tear down my spare tcase to rebuild and beef up before my road trip. View attachment 922665 View attachment 922666

How are you beefing this up? Did you have any issues with popping out of gear?

 

[399strokerEB]

How are you beefing this up? Did you have any issues with popping out of gear?

Adding a HD output from advanced adapters. No idea how it shifted, just a spare one I had.

 

[tonytony9]

Working on the intake manifold today. 1250S-3 gasket replacement, cleaning her up, and spraying with Ford Corporate Blue.

 

[FordBronc]

After I got the lower ball joint rmvd using the common C press, I found out it would not budge the upper. So I ended trying a hydraulic shop press, I thought I was going to taco my knuckle. So I fired up the smoke wrench and got it right out, and then got both new ones pressed back in. Now I am paused to drill the knuckles to be able to use the Bullet Proof steering stuff I had setting around. And so the snowball begins.

 

[joshua]

Not much to say that the pic doesn’t

 

[FordBronc]

Well I got things layed out correctly, in my pic I had the 2 links connected all wrong to the drop pitman arm. It was just quick bolted to keep all the pieces together and not get lost in the shop.

Then I dug into figuring out what I have to mod to put the Bullet Proof steering linkage set up on the Bronco. I need to shorten the main drag link. So I have to measure it like 4 times and cut it once, on one end and then get a new weld in insert/bung from them. And start down that road.

Also have to shorten the other link (coming from the pitman arm and going to the passenger side knuckle). I also drilled out the passenger side knuckle. And still need to put the passenger side knuckle on the axle, put in the upgrade axles in and keep on working on it.

For now just going to get it back together and an all 4's and work on a few other issues.

 

[Bulery159]

I looked at mine today, had to goto work early so I didn’t have time to touch it. I’ve been replacing panels in the drivers side got the kick panel mocked up along with a new door post

 

[gnsteam]

Loaded up the new Tom's OffRoad, six point plate cage. For a trip to the powder coat shop.

 

[hunter1]

Working on fabbing up a copycat console. Ran out of Argon for the welder and had to use self tappers to hold it together till I get gas. Changed dimensions some so I can install cup holders in the flat section in front of the lid. Also cutting an opening in the lower flat section at the front to hold a cell phone.

 

[joshua]

Just threw this duff hoop on for fun. Been sitting in my closet since 2007

 

[sprdv1]

Picked up cage from the powder coater.

View attachment 922653

Turned out real nice

 

[sprdv1]

Working on fabbing up a copycat console. Ran out of Argon for the welder and had to use self tappers to hold it together till I get gas. Changed dimensions some so I can install cup holders in the flat section in front of the lid. Also cutting an opening in the lower flat section at the front to hold a cell phone. View attachment 922929 View attachment 922930

Nice job...

 

[Soylent]

New glove box to work with my cage. The old hard board box (or whatever it was made of) shattered into a million pieces.

 

[sprdv1]

I got it from East Coast Gear Supply. It was during a sale for Black Friday I believe. I have to dig up the receipt when I get back to the house. They hooked me up with a crazy good deal on it plus free shipping. I want to say $930 in total. At that point it was a no-brainer to go back to them for the ring and pinion gears.

Thank you sir.

 

[sprdv1]

new exhaust

Get err done

 

[sprdv1]

I had some old cage shocks on the front, I've already replaced bushings once in them. I figured it was probably time to replace them.

I don't blame ya

 

[56f100bbw]

Did a big cleanup on my 76 bronco going to Davis Monthan Air Force Base, car show in the morning

 

[56f100bbw]

Went to Davis monthan Air Force Base today car show , I was the only bronco and they put me in the truck category. I got beat out by a 58 Chevy. Long bed farm truck.