77broncodriver
Full Member
- Joined
- Nov 21, 2009
- Messages
- 344
Alright guys, I've put up a few of these posts but they all ended up being confusing.
What I have:
Ford racing 306
24lb injectors with calibrated maf
Explorer intake
Rjm harness
Bcbronco fuel kit
All new sensors except the map? I think that's what it's called, the one that does the pressure.
New sensor on distributor
New coil
From the last time I ran codes it just came up with smog stuff, I don't have any of it so its fine.
Tps is set right, idle is set right.
The problem is, it will start fine, it will run but feels like it has a miss almost, just doesn't run smooth, then when it gets hot it will die, then it won't start again till it cools down. I've literally done everything I can think of to this thing, I stated the swap almost a year ago now, this school year I'm at college so I can't work on it as much but it's just been a pain!
I'm trying to find someone in the Bay Area that is good with this swap that can possibly come by and help me out.
Any other suggestions welcome too!
Thanks Evan
What I have:
Ford racing 306
24lb injectors with calibrated maf
Explorer intake
Rjm harness
Bcbronco fuel kit
All new sensors except the map? I think that's what it's called, the one that does the pressure.
New sensor on distributor
New coil
From the last time I ran codes it just came up with smog stuff, I don't have any of it so its fine.
Tps is set right, idle is set right.
The problem is, it will start fine, it will run but feels like it has a miss almost, just doesn't run smooth, then when it gets hot it will die, then it won't start again till it cools down. I've literally done everything I can think of to this thing, I stated the swap almost a year ago now, this school year I'm at college so I can't work on it as much but it's just been a pain!
I'm trying to find someone in the Bay Area that is good with this swap that can possibly come by and help me out.
Any other suggestions welcome too!
Thanks Evan











