• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

budget on board air?

cody72sport

Sr. Member
Joined
Mar 31, 2009
Messages
796
has anyone built an on board air system on the cheap? harbor freight has some 12 volt compressors that get good reviews, i was thinking about putting an air tank where my aux tank used to be
 

Bukin 67

Bronco Abuser
Joined
Jul 3, 2008
Messages
2,268
has anyone built an on board air system on the cheap? harbor freight has some 12 volt compressors that get good reviews, i was thinking about putting an air tank where my aux tank used to be

I don't know about HF's compressors, but the tank location idea is good. That's where I would have put it if I still had room there.
I used a caddy suspension compressor for my original one. With about 25' of hose alone (no tank) there was enough pressure to seat a 33x12.5 tire back on the rim.
 

ep67bro

Contributor
Bronco Junky
Joined
Aug 28, 2008
Messages
3,873
Loc.
Easton, MD
I am interested in this too. Always thought that would be a good location for a tank. Have you found a tank to use? I am hoping to put an Arb in my rear axle but the arb compressor seems a little steep!
 

marshall godron

Contributor
Full Member
Joined
Sep 20, 2011
Messages
232
On board air

I got a wet tank out of a tractor trailer n mounted it under the pass side floor board but same idea. You can find them at truck wrecking yards there the perfect size it only cost me $10.00;D
 

hyghlndr

Contributor
Bronco Guru
Joined
Jan 19, 2009
Messages
5,264
Loc.
Hockessin, Delaware
My old offroad Bronco had a York air conditioning compressor turned into an air pump with a storage tank under the passenger's side. Worked well.
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
That's what I was going to say . get an old ac York compressor and mount it on your motor front. It just takes about 8.... 3/8 bolts. to mount of course you'll need a bottom pulley to pull the compressor. Then just a toggle switch and 12V will kick into pump mode.
....... Also something you guys may not understand .. any old York will do the job. I'm not sure they can be too worn out. and used ones are a dime a dozen.
 

moses_m

Full Member
Joined
May 5, 2013
Messages
262
X2 on the master flow. Works great. I have one on work truck that I throw in the bronco when going to the dunes.
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
Oasis has the best 12 volt compressor made today.
Bullet proof, simple, reliable, quality.
Sounds expensive?
They probably are. I haven't looked into them in a few years.
 

welndmn

Bronco Guru
Joined
Nov 12, 2001
Messages
2,112
I mounted this one on the inner fender well http://www.amazon.com/Master-Flow-M...536643&sr=8-1&keywords=tsunami+air+compressor
It works great and should work for your application.

Hank

I have this one mounted to my tow rig, it works well to fill trailer tires but they run really hot. To air up a off road tire, there would need to be a cooling cycle.

No 12v compressors will hold a torch to a engine driven compressor.

I'd hit up the junk yards and see if you can Find any York brackets and put a york on it.
 

Bart

Bronco Guru
Joined
Dec 12, 2001
Messages
1,695
Loc.
Buffalo Gap, Texas
I mounted this one on the inner fender well http://www.amazon.com/Master-Flow-M...536643&sr=8-1&keywords=tsunami+air+compressor
It works great and should work for your application.

Hank
I've bought two of those and their reliablity is not too good. One has taken a dump all ready and the other one has only been use a time or two. I only paid $25 for each of them. So let the buyer beware. I now have a Viair that works good but like all small compressors it's slow. Tank would be a good idea.
 

KyleQ

Bronco Guru
Joined
Apr 24, 2008
Messages
5,480
I've got a Vlair setup and a MasterFlow portable setup as well - both are awesome.
 
Top