• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Question about BC brake booster

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
Is that rubber piece that I have the arrow pointed to a problem? It looks cracked but wasn't sure if it sealed air, or just served as grommet. Been sitting on a shelf for 5 years and about to install and noticed.
 

Attachments

  • IMG_9677x.jpg
    IMG_9677x.jpg
    87.5 KB · Views: 96
OP
OP
JWMcCrary

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
So the plastic piece that the vacuum hose connects to should pull out? Seems logical it would but Wanted to be sure before I screw it up
 

bronconut73

Bronco Guru
Joined
Aug 7, 2012
Messages
9,919
So the plastic piece that the vacuum hose connects to should pull out? Seems logical it would but Wanted to be sure before I screw it up

Yup.
Go to your local parts store and look for the section where the HELP name brand parts are. They have door handles, window handles, they usually also have check valves their too but if not the parts guy cam get one off the parts shelf.
If they don't have a check valve for a 76/77 bronco the booster the vendors sold for a long time was usually referred to as the Mustang II booster.
Like uhhh...'76 to '79 Mustang II.

It will at least give you a vehicle to ask for if they don't have a check valve for the 76/77 Bronco.
 

73azbronco

Contributor
Bronco Guru
Joined
Nov 11, 2007
Messages
8,782
geta mighty vac, put some suction/vacuum on it and see if it leaks.
 
Top