• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

BroncoBub Build

OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Finished up the refresh of the other leaf spring and completed sand blasting of the rear end housing. Put 2 coats of black epoxy primer on it. Hopefully by the end of the week will have all the undercarriage completed.
 

Attachments

  • 20210316_144404_HDR.jpg
    20210316_144404_HDR.jpg
    81.6 KB · Views: 80
  • 20210316_144400_HDR.jpg
    20210316_144400_HDR.jpg
    104.2 KB · Views: 78
  • 20210316_144329.jpg
    20210316_144329.jpg
    115.6 KB · Views: 85
  • 20210316_144320.jpg
    20210316_144320.jpg
    117 KB · Views: 79

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Finished up the refresh of the other leaf spring and completed sand blasting of the rear end housing. Put 2 coats of black epoxy primer on it. Hopefully by the end of the week will have all the undercarriage completed.

good luck.. hopefully you can make it happen...

looking good
 
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Sandblasted the radius arms and painted to look like bare steel.
 

Attachments

  • 20210318_150706.jpg
    20210318_150706.jpg
    131.4 KB · Views: 76
  • 20210318_154829.jpg
    20210318_154829.jpg
    102.9 KB · Views: 71
  • 20210318_154817.jpg
    20210318_154817.jpg
    124.8 KB · Views: 74
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
also I'm trying to stay organized. Tired of looking for parts here and there!
 

Attachments

  • 20210204_152512_HDR.jpg
    20210204_152512_HDR.jpg
    81.1 KB · Views: 62
  • 20210204_152506_HDR.jpg
    20210204_152506_HDR.jpg
    91.1 KB · Views: 67
  • 20210204_151531_HDR.jpg
    20210204_151531_HDR.jpg
    123.4 KB · Views: 64
  • 20210204_151305.jpg
    20210204_151305.jpg
    124.7 KB · Views: 66
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Finished painting the rear end housing.
 

Attachments

  • 20210320_151933.jpg
    20210320_151933.jpg
    100.4 KB · Views: 53
  • 20210320_151507.jpg
    20210320_151507.jpg
    121.4 KB · Views: 53
  • 20210320_151527.jpg
    20210320_151527.jpg
    120.9 KB · Views: 49
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
A little eye candy....Finally something going together.
 

Attachments

  • Message_1616365264232.jpg
    Message_1616365264232.jpg
    27.2 KB · Views: 68
  • 20210321_173147.jpg
    20210321_173147.jpg
    121.9 KB · Views: 71
  • 20210321_173200.jpg
    20210321_173200.jpg
    105.5 KB · Views: 70
  • 20210321_173207.jpg
    20210321_173207.jpg
    152.2 KB · Views: 74
  • Message_1616365287410.jpg
    Message_1616365287410.jpg
    118.6 KB · Views: 64
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Rear axle housing installed and the Rancho RS9000 shocks installed. I have a hoist in the garage that makes lifting things a breeze!

Looks like I have to replace the entire rear end with new bearings, spiders and new ring and pinion.
 

Attachments

  • Message_1616432930325.jpg
    Message_1616432930325.jpg
    120.6 KB · Views: 100
  • Message_1616426136658.jpg
    Message_1616426136658.jpg
    92.5 KB · Views: 90
  • 20210322_145419.jpg
    20210322_145419.jpg
    107.6 KB · Views: 93
  • 20210322_145439.jpg
    20210322_145439.jpg
    117.6 KB · Views: 107
  • 20210322_095127.jpg
    20210322_095127.jpg
    112.6 KB · Views: 92
  • 20210322_095122.jpg
    20210322_095122.jpg
    113.9 KB · Views: 96
  • 20210322_093557.jpg
    20210322_093557.jpg
    78.9 KB · Views: 108

chuckyb

Contributor
Sr. Member
Joined
Oct 25, 2016
Messages
960
It's nice to have a hoist to work with on this stage of the project. The frame and everything on it look beautiful. Great clean build!
 
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
It's nice to have a hoist to work with on this stage of the project. The frame and everything on it look beautiful. Great clean build!

The hoist is a great help especially since i'm doing most of the work by myself.
Appreciate the kind words.
Bub
 
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Looks like I'll be replacing the internals of the 9" rear end including the ring and pinion. A lot of deep pitting in some areas.
 

Attachments

  • 20210322_210657.jpg
    20210322_210657.jpg
    168.3 KB · Views: 57
  • 20210322_205129.jpg
    20210322_205129.jpg
    160.8 KB · Views: 57
  • 20210322_210707.jpg
    20210322_210707.jpg
    102.3 KB · Views: 58
  • 20210322_210734.jpg
    20210322_210734.jpg
    108.7 KB · Views: 58

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
Looks fantastic. Did a great job on the springs. They never look that good after shipping!

Although I must add that in spite of the potentially tight fit with the front spring hanger, the double-wrap eye always goes to the front on a Bronco.
Basically whenever there is a leaf pack with the double-wrap on one eye only, that eye must always mount to the rigid frame mount rather than the shackle end.

It's not that they won't work as you have them of course, and very few people end up ever breaking a main leaf. But wanted to let you know now while it's still easily workable if you want to turn them around.
I don't know what, if any, other issues this could cause. Interference with the shackle? Different suspension dynamics? Maybe neither, but don't know for sure.

Were your front spring hanger bolt holes wallowed out originally? If so and the holes raised up, the outer leaf wrap could be even closer to the metal part than normal, making contact with it.
While this does no harm in general, it will certainly bugger up your powder coat (inside the hanger out of sight though) where they touch.

Carry on!;D

Paul
 
OP
OP
BroncoBub

BroncoBub

Sr. Member
Joined
Oct 14, 2018
Messages
708
Looks fantastic. Did a great job on the springs. They never look that good after shipping!

Although I must add that in spite of the potentially tight fit with the front spring hanger, the double-wrap eye always goes to the front on a Bronco.
Basically whenever there is a leaf pack with the double-wrap on one eye only, that eye must always mount to the rigid frame mount rather than the shackle end.

It's not that they won't work as you have them of course, and very few people end up ever breaking a main leaf. But wanted to let you know now while it's still easily workable if you want to turn them around.
I don't know what, if any, other issues this could cause. Interference with the shackle? Different suspension dynamics? Maybe neither, but don't know for sure.

Were your front spring hanger bolt holes wallowed out originally? If so and the holes raised up, the outer leaf wrap could be even closer to the metal part than normal, making contact with it.
While this does no harm in general, it will certainly bugger up your powder coat (inside the hanger out of sight though) where they touch.

Carry on!;D

Paul

Wow thanks for pointing that out Paul. I guess with all the excitement of starting to assemble things back I didn't pay attention what end I had in front. No the hole isn't wallowed out. I'll reverse the springs this morning.
Thanks again.
 

sprdv1

Contributor
REBEL
Joined
Mar 8, 2007
Messages
81,996
Wow thanks for pointing that out Paul. I guess with all the excitement of starting to assemble things back I didn't pay attention what end I had in front. No the hole isn't wallowed out. I'll reverse the springs this morning.
Thanks again.

them little things add up right.. and can hit you at the wrong time
 
Top