Looks like a winner to me. Good luck and have a great day.
Wait, so the new 6G's don't have hood struts already?Well it is a 6G, but I'll post it here anyway. Installed hood struts which makes it much easier to pop the hood. I did this on my '69 which made a huge difference because those hoods are so much heavier, but still a nice upgrade.
View attachment 943971
Not this one, a '24, and I don't think my son's '23 does either. His comment to me was, "they should have come from the factory this way".Wait, so the new 6G's don't have hood struts already?
Back in the '70's and '80's that's where most of us put the rear spkrs... frt ones went in the big HOLES we cut into our doors.relocated my 6x9 speakers from the roll cage (mounted with jeep speaker pods) to over the fenders. initially started a template for a 6.5s on the side panels but just decided to reuse the speakers i have and build little boxes. it'll work for now... still kinda looks like an after thought IMO
It kinda seems like that or a failing fuel pump. I am hoping its just a filter issue. The pump is a brand new Carter with less than 500 miles on it!Fuel filter clogged?
It sat for three weeks max. I recently finished my powertrain rebuild and have been doing the break it on the 302. I had no signs of fuel starvation in the 25 minute drive prior to the re-fueling. It may have been vapor locking, but it seems like the conditions were wrong for that. 71 F degrees at the time of the issue and no signs of overheating. Years ago before I rebuilt the engine, I would get vapor lock/fuel boiling in the carb. I didn't hear any boiling. Dunno yet.But does it also sit for long periods of time between some of those five hundred miles?
Hoping it’s a filter issue as well, but you never know with today’s parts.
Pumps don’t like to sit.
Changed rear gear to 3:55 to closer match the front 3:54. Changed over to power steering, installed the new steering box and the pump assembly.Let's hear it! It should be an ongoing thread. Whatever you did, big or small, post pics, threadjack, comments, anything goes!
Today I'm picking up some heavy duty rubber and am building wheel well liners!






