• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

What have you done to your Bronco today?

76BroncoPete

Contributor
Sr. Member
Joined
Mar 1, 2013
Messages
433
Washed it.
 

Attachments

  • IMG_4362.jpeg
    IMG_4362.jpeg
    315.9 KB · Views: 79

1969miller

Contributor
Sr. Member
Joined
Jan 18, 2022
Messages
371
Loc.
Elk Grove
Not my bronco but broke this 72 explorer out of shop jail to finish up. It will be available at the WH roundup, needs a new home. Brand new engine, new stock replica exhaust, most of the major rust repair has been done (not perfect but the doors shut incredibly nicely). 3 speed on the floor. I'll finish up the new front end bushings early this coming week. It's a nice little Bronco.
20250509_083559.jpg


20250509_090916.jpg
 

Attachments

  • 20250509_090817.jpg
    20250509_090817.jpg
    97.7 KB · Views: 69

Shimmy

Contributor
1977 Bronco
Joined
Jun 20, 2021
Messages
1,396
Loc.
Maple Valley
relocated my 6x9 speakers from the roll cage (mounted with jeep speaker pods) to over the fenders. initially started a template for a 6.5s on the side panels but just decided to reuse the speakers i have and build little boxes. it'll work for now... still kinda looks like an after thought IMO
 

Attachments

  • IMG_2655.jpeg
    IMG_2655.jpeg
    154.5 KB · Views: 79
  • IMG_2656.jpeg
    IMG_2656.jpeg
    112 KB · Views: 85

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
relocated my 6x9 speakers from the roll cage (mounted with jeep speaker pods) to over the fenders. initially started a template for a 6.5s on the side panels but just decided to reuse the speakers i have and build little boxes. it'll work for now... still kinda looks like an after thought IMO
Back in the '70's and '80's that's where most of us put the rear spkrs... frt ones went in the big HOLES we cut into our doors. :)
 

NJBronk

Contributor
Sr. Member
Joined
Oct 11, 2022
Messages
369
Painted radius arms and caps after getting them back from sandblasting. Was able to clean up the track bar myself using Evapo-rust and paint that as well. Hopefully will be able to get the front end back together this weekend!

IMG_3797.jpeg


IMG_3766.jpeg


IMG_3783.jpeg


IMG_3799.jpeg

image.jpg
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,650
But does it also sit for long periods of time between some of those five hundred miles?
Hoping it’s a filter issue as well, but you never know with today’s parts.
Pumps don’t like to sit.
 

abrogate932

Jr. Member
Joined
Jun 5, 2018
Messages
68
Loc.
St Louis MO metro
But does it also sit for long periods of time between some of those five hundred miles?
Hoping it’s a filter issue as well, but you never know with today’s parts.
Pumps don’t like to sit.
It sat for three weeks max. I recently finished my powertrain rebuild and have been doing the break it on the 302. I had no signs of fuel starvation in the 25 minute drive prior to the re-fueling. It may have been vapor locking, but it seems like the conditions were wrong for that. 71 F degrees at the time of the issue and no signs of overheating. Years ago before I rebuilt the engine, I would get vapor lock/fuel boiling in the carb. I didn't hear any boiling. Dunno yet.
 

hsach

Contributor
Members Only
Joined
Apr 19, 2013
Messages
435
A fairly quick and inexpensive check can be done for the fuel pump to see if it is failing. Get a clear fuel filter and install it just before the carb, you will be able to see if you pump is weak. You can also just disconnect the line at the carb, and put that end in a bottle to see if the pump can fill it. I have not had good luck with the last couple of Carter pumps, diaphragms on both failed early.
 

gnsteam

Contributor
Bronco Guru
Joined
Jan 29, 2010
Messages
4,148
Loc.
Lincoln NE
I borrowed a Milwaukee sheet metal nibbler from work. To trim back the lower core support. For more A/C condenser clearance.
06e5283a-1c49-4a08-91a1-edfb33e85f8a-1_all_5163.jpg
 

nvrstuk

Contributor
Just a Bronco driver for over 50 yrs!
Joined
Jul 31, 2001
Messages
10,622
Loc.
PNW
Been over a whole WEEK since I filled up my Bronco!! Almost going thru withdrawal not driving it for about the last week but I've been working sunup to sundown so... :(

Only 19.4 gal in my 21 + gal tank my fuel pump was quiet so my 4 remote pickups in my modded tank must have been working good. I did pack a small 2 gal can with me on my trip into town in case I needed it. lol

2 stations to fill up as one is much closer but about .50/gal more than
 

Attachments

  • 20250514_112914.jpg
    20250514_112914.jpg
    241.8 KB · Views: 66
  • 20250514_115525.jpg
    20250514_115525.jpg
    191.9 KB · Views: 68

Grey owl

Contributor
Sr. Member
Joined
Nov 19, 2024
Messages
398
Let's hear it! It should be an ongoing thread. Whatever you did, big or small, post pics, threadjack, comments, anything goes!

Today I'm picking up some heavy duty rubber and am building wheel well liners!
Changed rear gear to 3:55 to closer match the front 3:54. Changed over to power steering, installed the new steering box and the pump assembly.
 
Top